Added a list_datastore_category action #99
Annotations
4 errors and 695 warnings
|
main (exchange-powershell, 1.1.0)
buildx failed with: ERROR: failed to build: failed to solve: process "/bin/sh -c apk add --no-cache ca-certificates less ncurses-terminfo-base krb5-libs libgcc libintl libssl1.1 libstdc++ tzdata userspace-rcu zlib icu-libs curl" did not complete successfully: exit code: 1
|
|
main (exchange-powershell, 1.0.0)
buildx failed with: ERROR: failed to build: failed to solve: process "/bin/sh -c apk add --no-cache ca-certificates less ncurses-terminfo-base krb5-libs libgcc libintl libssl1.1 libstdc++ tzdata userspace-rcu zlib icu-libs curl" did not complete successfully: exit code: 1
|
|
main (snort3, 1.0.0)
buildx failed with: ERROR: failed to build: failed to solve: process "/bin/sh -c echo \"Build libsafec\" && tar -xzvf libsafec-${SAFEC_VER}.tar && cd libsafec-${SAFEC_VER}.0-g6d921f && ./configure && make -j 4 && make install && echo \"Build gperftools\" && cd ${SRC_HOME} && tar -xvf gperftools-$GPERF_VER.tar && cd ${SRC_HOME}/gperftools-$GPERF_VER && ./configure && make -j 4 && make install && echo \"Build libdaq\" && cd ${SRC_HOME} && tar xvf libdaq-${DAQ_VER}.tar && cd ${SRC_HOME}/libdaq-${DAQ_VER} && ./configure && make -j 4 && make install && echo \"Build Snort3\" && cd ${SRC_HOME} && tar xvf snort3-${SNORT_VER}.tar && cd ${SRC_HOME}/snort3-${SNORT_VER} && ./configure_cmake.sh --prefix=/usr/local --enable-tcmalloc && cd build && make -j 4 && make install && cd / && rm -rf ${SRC_HOME} && apk del build-base cmake" did not complete successfully: exit code: 2
|
|
main (outlook-exchange, 1.0.0)
buildx failed with: ERROR: failed to build: failed to solve: failed to compute cache key: failed to calculate checksum of ref dhkprxly3lablyjx6u7rkh87y::ushqmv51ndlzfdcj5wvyyu2zq: "/usr/lib/libgpg-error.so.0": not found
|
|
list_apps
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v2. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
|
|
list_apps
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (exchange-powershell, 1.1.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
|
|
main (exchange-powershell, 1.1.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (exchange-powershell, 1.1.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (exchange-powershell, 1.1.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (exchange-powershell, 1.1.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (exchange-powershell, 1.1.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (exchange-powershell, 1.1.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (exchange-powershell, 1.1.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (exchange-powershell, 1.1.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (exchange-powershell, 1.1.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (exchange-powershell, 1.1.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (exchange-powershell, 1.1.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (exchange-powershell, 1.0.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
|
|
main (exchange-powershell, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (exchange-powershell, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (exchange-powershell, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (exchange-powershell, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (exchange-powershell, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (exchange-powershell, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (exchange-powershell, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (exchange-powershell, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (exchange-powershell, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (exchange-powershell, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (exchange-powershell, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (secureworks, 1.0.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
|
|
The 'as' keyword should match the case of the 'from' keyword:
secureworks/1.0.0/Dockerfile#L5
FromAsCasing: 'as' and 'FROM' keywords' casing do not match
More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
|
|
The 'as' keyword should match the case of the 'from' keyword:
secureworks/1.0.0/Dockerfile#L2
FromAsCasing: 'as' and 'FROM' keywords' casing do not match
More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
|
|
JSON arguments recommended for ENTRYPOINT/CMD to prevent unintended behavior related to OS signals:
secureworks/1.0.0/Dockerfile#L26
JSONArgsRecommended: JSON arguments recommended for CMD to prevent unintended behavior related to OS signals
More info: https://docs.docker.com/go/dockerfile/rule/json-args-recommended/
|
|
main (secureworks, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (secureworks, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (secureworks, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (secureworks, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (secureworks, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (secureworks, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (secureworks, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (secureworks, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (secureworks, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (secureworks, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (secureworks, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (netcraft, 1.0.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
|
|
The 'as' keyword should match the case of the 'from' keyword:
netcraft/1.0.0/Dockerfile#L5
FromAsCasing: 'as' and 'FROM' keywords' casing do not match
More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
|
|
The 'as' keyword should match the case of the 'from' keyword:
netcraft/1.0.0/Dockerfile#L2
FromAsCasing: 'as' and 'FROM' keywords' casing do not match
More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
|
|
JSON arguments recommended for ENTRYPOINT/CMD to prevent unintended behavior related to OS signals:
netcraft/1.0.0/Dockerfile#L26
JSONArgsRecommended: JSON arguments recommended for CMD to prevent unintended behavior related to OS signals
More info: https://docs.docker.com/go/dockerfile/rule/json-args-recommended/
|
|
main (netcraft, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (netcraft, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (netcraft, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (netcraft, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (netcraft, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (netcraft, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (netcraft, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (netcraft, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (netcraft, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (netcraft, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (netcraft, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (siemonster, 1.0.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
|
|
JSON arguments recommended for ENTRYPOINT/CMD to prevent unintended behavior related to OS signals:
siemonster/1.0.0/Dockerfile#L26
JSONArgsRecommended: JSON arguments recommended for CMD to prevent unintended behavior related to OS signals
More info: https://docs.docker.com/go/dockerfile/rule/json-args-recommended/
|
|
The 'as' keyword should match the case of the 'from' keyword:
siemonster/1.0.0/Dockerfile#L5
FromAsCasing: 'as' and 'FROM' keywords' casing do not match
More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
|
|
The 'as' keyword should match the case of the 'from' keyword:
siemonster/1.0.0/Dockerfile#L2
FromAsCasing: 'as' and 'FROM' keywords' casing do not match
More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
|
|
main (siemonster, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (siemonster, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (siemonster, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (siemonster, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (siemonster, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (siemonster, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (siemonster, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (siemonster, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (siemonster, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (siemonster, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (siemonster, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (velociraptor, 1.0.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
|
|
JSON arguments recommended for ENTRYPOINT/CMD to prevent unintended behavior related to OS signals:
velociraptor/1.0.0/Dockerfile#L20
JSONArgsRecommended: JSON arguments recommended for CMD to prevent unintended behavior related to OS signals
More info: https://docs.docker.com/go/dockerfile/rule/json-args-recommended/
|
|
The 'as' keyword should match the case of the 'from' keyword:
velociraptor/1.0.0/Dockerfile#L5
FromAsCasing: 'as' and 'FROM' keywords' casing do not match
More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
|
|
The 'as' keyword should match the case of the 'from' keyword:
velociraptor/1.0.0/Dockerfile#L2
FromAsCasing: 'as' and 'FROM' keywords' casing do not match
More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
|
|
main (velociraptor, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (velociraptor, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (velociraptor, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (velociraptor, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (velociraptor, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (velociraptor, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (velociraptor, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (velociraptor, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (velociraptor, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (velociraptor, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (velociraptor, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (archive-org, 1.0.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
|
|
JSON arguments recommended for ENTRYPOINT/CMD to prevent unintended behavior related to OS signals:
archive-org/1.0.0/Dockerfile#L26
JSONArgsRecommended: JSON arguments recommended for CMD to prevent unintended behavior related to OS signals
More info: https://docs.docker.com/go/dockerfile/rule/json-args-recommended/
|
|
The 'as' keyword should match the case of the 'from' keyword:
archive-org/1.0.0/Dockerfile#L5
FromAsCasing: 'as' and 'FROM' keywords' casing do not match
More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
|
|
The 'as' keyword should match the case of the 'from' keyword:
archive-org/1.0.0/Dockerfile#L2
FromAsCasing: 'as' and 'FROM' keywords' casing do not match
More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
|
|
main (archive-org, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (archive-org, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (archive-org, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (archive-org, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (archive-org, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (archive-org, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (archive-org, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (archive-org, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (archive-org, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (archive-org, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (archive-org, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (breachsense, 1.0.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
|
|
JSON arguments recommended for ENTRYPOINT/CMD to prevent unintended behavior related to OS signals:
breachsense/1.0.0/Dockerfile#L26
JSONArgsRecommended: JSON arguments recommended for CMD to prevent unintended behavior related to OS signals
More info: https://docs.docker.com/go/dockerfile/rule/json-args-recommended/
|
|
The 'as' keyword should match the case of the 'from' keyword:
breachsense/1.0.0/Dockerfile#L5
FromAsCasing: 'as' and 'FROM' keywords' casing do not match
More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
|
|
The 'as' keyword should match the case of the 'from' keyword:
breachsense/1.0.0/Dockerfile#L2
FromAsCasing: 'as' and 'FROM' keywords' casing do not match
More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
|
|
main (breachsense, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (breachsense, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (breachsense, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (breachsense, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (breachsense, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (breachsense, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (breachsense, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (breachsense, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (breachsense, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (breachsense, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (breachsense, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (sooty, 1.0.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
|
|
JSON arguments recommended for ENTRYPOINT/CMD to prevent unintended behavior related to OS signals:
sooty/1.0.0/Dockerfile#L26
JSONArgsRecommended: JSON arguments recommended for CMD to prevent unintended behavior related to OS signals
More info: https://docs.docker.com/go/dockerfile/rule/json-args-recommended/
|
|
The 'as' keyword should match the case of the 'from' keyword:
sooty/1.0.0/Dockerfile#L5
FromAsCasing: 'as' and 'FROM' keywords' casing do not match
More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
|
|
The 'as' keyword should match the case of the 'from' keyword:
sooty/1.0.0/Dockerfile#L2
FromAsCasing: 'as' and 'FROM' keywords' casing do not match
More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
|
|
main (sooty, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (sooty, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (sooty, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (sooty, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (sooty, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (sooty, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (sooty, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (sooty, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (sooty, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (sooty, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (sooty, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (email, 1.3.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
|
|
JSON arguments recommended for ENTRYPOINT/CMD to prevent unintended behavior related to OS signals:
email/1.3.0/Dockerfile#L26
JSONArgsRecommended: JSON arguments recommended for CMD to prevent unintended behavior related to OS signals
More info: https://docs.docker.com/go/dockerfile/rule/json-args-recommended/
|
|
The 'as' keyword should match the case of the 'from' keyword:
email/1.3.0/Dockerfile#L5
FromAsCasing: 'as' and 'FROM' keywords' casing do not match
More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
|
|
The 'as' keyword should match the case of the 'from' keyword:
email/1.3.0/Dockerfile#L2
FromAsCasing: 'as' and 'FROM' keywords' casing do not match
More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
|
|
main (email, 1.3.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (email, 1.3.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (email, 1.3.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (email, 1.3.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (email, 1.3.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (email, 1.3.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (email, 1.3.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (email, 1.3.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (email, 1.3.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (email, 1.3.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (email, 1.3.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (mysql, 1.0.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
|
|
JSON arguments recommended for ENTRYPOINT/CMD to prevent unintended behavior related to OS signals:
mysql/1.0.0/Dockerfile#L27
JSONArgsRecommended: JSON arguments recommended for CMD to prevent unintended behavior related to OS signals
More info: https://docs.docker.com/go/dockerfile/rule/json-args-recommended/
|
|
The 'as' keyword should match the case of the 'from' keyword:
mysql/1.0.0/Dockerfile#L5
FromAsCasing: 'as' and 'FROM' keywords' casing do not match
More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
|
|
The 'as' keyword should match the case of the 'from' keyword:
mysql/1.0.0/Dockerfile#L2
FromAsCasing: 'as' and 'FROM' keywords' casing do not match
More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
|
|
main (mysql, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (mysql, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (mysql, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (mysql, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (mysql, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (mysql, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (mysql, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (mysql, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (mysql, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (mysql, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (mysql, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (shuffle-subflow, 1.0.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
|
|
JSON arguments recommended for ENTRYPOINT/CMD to prevent unintended behavior related to OS signals:
shuffle-subflow/1.0.0/Dockerfile#L26
JSONArgsRecommended: JSON arguments recommended for CMD to prevent unintended behavior related to OS signals
More info: https://docs.docker.com/go/dockerfile/rule/json-args-recommended/
|
|
The 'as' keyword should match the case of the 'from' keyword:
shuffle-subflow/1.0.0/Dockerfile#L5
FromAsCasing: 'as' and 'FROM' keywords' casing do not match
More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
|
|
The 'as' keyword should match the case of the 'from' keyword:
shuffle-subflow/1.0.0/Dockerfile#L2
FromAsCasing: 'as' and 'FROM' keywords' casing do not match
More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
|
|
main (shuffle-subflow, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (shuffle-subflow, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (shuffle-subflow, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (shuffle-subflow, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (shuffle-subflow, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (shuffle-subflow, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (shuffle-subflow, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (shuffle-subflow, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (shuffle-subflow, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (shuffle-subflow, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (shuffle-subflow, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (active-directory, 1.0.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
|
|
JSON arguments recommended for ENTRYPOINT/CMD to prevent unintended behavior related to OS signals:
active-directory/1.0.0/Dockerfile#L26
JSONArgsRecommended: JSON arguments recommended for CMD to prevent unintended behavior related to OS signals
More info: https://docs.docker.com/go/dockerfile/rule/json-args-recommended/
|
|
The 'as' keyword should match the case of the 'from' keyword:
active-directory/1.0.0/Dockerfile#L5
FromAsCasing: 'as' and 'FROM' keywords' casing do not match
More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
|
|
The 'as' keyword should match the case of the 'from' keyword:
active-directory/1.0.0/Dockerfile#L2
FromAsCasing: 'as' and 'FROM' keywords' casing do not match
More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
|
|
main (active-directory, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (active-directory, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (active-directory, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (active-directory, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (active-directory, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (active-directory, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (active-directory, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (active-directory, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (active-directory, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (active-directory, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (active-directory, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (twilio, 1.9.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
|
|
The 'as' keyword should match the case of the 'from' keyword:
twilio/1.9.0/Dockerfile#L2
FromAsCasing: 'as' and 'FROM' keywords' casing do not match
More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
|
|
JSON arguments recommended for ENTRYPOINT/CMD to prevent unintended behavior related to OS signals:
twilio/1.9.0/Dockerfile#L27
JSONArgsRecommended: JSON arguments recommended for CMD to prevent unintended behavior related to OS signals
More info: https://docs.docker.com/go/dockerfile/rule/json-args-recommended/
|
|
The 'as' keyword should match the case of the 'from' keyword:
twilio/1.9.0/Dockerfile#L5
FromAsCasing: 'as' and 'FROM' keywords' casing do not match
More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
|
|
main (twilio, 1.9.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (twilio, 1.9.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (twilio, 1.9.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (twilio, 1.9.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (twilio, 1.9.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (twilio, 1.9.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (twilio, 1.9.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (twilio, 1.9.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (twilio, 1.9.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (twilio, 1.9.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (twilio, 1.9.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-ec2, 1.0.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
|
|
The 'as' keyword should match the case of the 'from' keyword:
aws-ec2/1.0.0/Dockerfile#L2
FromAsCasing: 'as' and 'FROM' keywords' casing do not match
More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
|
|
JSON arguments recommended for ENTRYPOINT/CMD to prevent unintended behavior related to OS signals:
aws-ec2/1.0.0/Dockerfile#L26
JSONArgsRecommended: JSON arguments recommended for CMD to prevent unintended behavior related to OS signals
More info: https://docs.docker.com/go/dockerfile/rule/json-args-recommended/
|
|
The 'as' keyword should match the case of the 'from' keyword:
aws-ec2/1.0.0/Dockerfile#L5
FromAsCasing: 'as' and 'FROM' keywords' casing do not match
More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
|
|
main (aws-ec2, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-ec2, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-ec2, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-ec2, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-ec2, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-ec2, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-ec2, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-guardduty, 1.0.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
|
|
main (aws-ec2, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
JSON arguments recommended for ENTRYPOINT/CMD to prevent unintended behavior related to OS signals:
aws-guardduty/1.0.0/Dockerfile#L26
JSONArgsRecommended: JSON arguments recommended for CMD to prevent unintended behavior related to OS signals
More info: https://docs.docker.com/go/dockerfile/rule/json-args-recommended/
|
|
main (aws-ec2, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
The 'as' keyword should match the case of the 'from' keyword:
aws-guardduty/1.0.0/Dockerfile#L5
FromAsCasing: 'as' and 'FROM' keywords' casing do not match
More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
|
|
main (aws-ec2, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
The 'as' keyword should match the case of the 'from' keyword:
aws-guardduty/1.0.0/Dockerfile#L2
FromAsCasing: 'as' and 'FROM' keywords' casing do not match
More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
|
|
main (aws-ec2, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-guardduty, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-guardduty, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-guardduty, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-guardduty, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-guardduty, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-guardduty, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-guardduty, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-guardduty, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-guardduty, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-guardduty, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-guardduty, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-s3, 1.0.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
|
|
JSON arguments recommended for ENTRYPOINT/CMD to prevent unintended behavior related to OS signals:
aws-s3/1.0.0/Dockerfile#L26
JSONArgsRecommended: JSON arguments recommended for CMD to prevent unintended behavior related to OS signals
More info: https://docs.docker.com/go/dockerfile/rule/json-args-recommended/
|
|
The 'as' keyword should match the case of the 'from' keyword:
aws-s3/1.0.0/Dockerfile#L5
FromAsCasing: 'as' and 'FROM' keywords' casing do not match
More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
|
|
The 'as' keyword should match the case of the 'from' keyword:
aws-s3/1.0.0/Dockerfile#L2
FromAsCasing: 'as' and 'FROM' keywords' casing do not match
More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
|
|
main (aws-s3, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-s3, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-s3, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-s3, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-s3, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-s3, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-s3, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-s3, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-s3, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-s3, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-s3, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-iam, 1.0.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
|
|
JSON arguments recommended for ENTRYPOINT/CMD to prevent unintended behavior related to OS signals:
aws-iam/1.0.0/Dockerfile#L26
JSONArgsRecommended: JSON arguments recommended for CMD to prevent unintended behavior related to OS signals
More info: https://docs.docker.com/go/dockerfile/rule/json-args-recommended/
|
|
The 'as' keyword should match the case of the 'from' keyword:
aws-iam/1.0.0/Dockerfile#L5
FromAsCasing: 'as' and 'FROM' keywords' casing do not match
More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
|
|
The 'as' keyword should match the case of the 'from' keyword:
aws-iam/1.0.0/Dockerfile#L2
FromAsCasing: 'as' and 'FROM' keywords' casing do not match
More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
|
|
main (aws-iam, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-iam, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-iam, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-iam, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-iam, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-iam, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-iam, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-iam, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-iam, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-iam, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-iam, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (sigma, 1.0.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
|
|
JSON arguments recommended for ENTRYPOINT/CMD to prevent unintended behavior related to OS signals:
sigma/1.0.0/Dockerfile#L29
JSONArgsRecommended: JSON arguments recommended for CMD to prevent unintended behavior related to OS signals
More info: https://docs.docker.com/go/dockerfile/rule/json-args-recommended/
|
|
The 'as' keyword should match the case of the 'from' keyword:
sigma/1.0.0/Dockerfile#L5
FromAsCasing: 'as' and 'FROM' keywords' casing do not match
More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
|
|
The 'as' keyword should match the case of the 'from' keyword:
sigma/1.0.0/Dockerfile#L2
FromAsCasing: 'as' and 'FROM' keywords' casing do not match
More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
|
|
main (sigma, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (sigma, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (sigma, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (sigma, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (sigma, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (sigma, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (sigma, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (sigma, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (sigma, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (sigma, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (sigma, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (databasemanager, 1.0.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
|
|
JSON arguments recommended for ENTRYPOINT/CMD to prevent unintended behavior related to OS signals:
databasemanager/1.0.0/Dockerfile#L26
JSONArgsRecommended: JSON arguments recommended for CMD to prevent unintended behavior related to OS signals
More info: https://docs.docker.com/go/dockerfile/rule/json-args-recommended/
|
|
The 'as' keyword should match the case of the 'from' keyword:
databasemanager/1.0.0/Dockerfile#L5
FromAsCasing: 'as' and 'FROM' keywords' casing do not match
More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
|
|
The 'as' keyword should match the case of the 'from' keyword:
databasemanager/1.0.0/Dockerfile#L2
FromAsCasing: 'as' and 'FROM' keywords' casing do not match
More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
|
|
main (databasemanager, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (databasemanager, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (databasemanager, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (databasemanager, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (databasemanager, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (databasemanager, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (databasemanager, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (databasemanager, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (databasemanager, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (databasemanager, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (databasemanager, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (redis, 1.0.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
|
|
The 'as' keyword should match the case of the 'from' keyword:
redis/1.0.0/Dockerfile#L5
FromAsCasing: 'as' and 'FROM' keywords' casing do not match
More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
|
|
The 'as' keyword should match the case of the 'from' keyword:
redis/1.0.0/Dockerfile#L2
FromAsCasing: 'as' and 'FROM' keywords' casing do not match
More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
|
|
JSON arguments recommended for ENTRYPOINT/CMD to prevent unintended behavior related to OS signals:
redis/1.0.0/Dockerfile#L27
JSONArgsRecommended: JSON arguments recommended for CMD to prevent unintended behavior related to OS signals
More info: https://docs.docker.com/go/dockerfile/rule/json-args-recommended/
|
|
main (redis, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (redis, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (redis, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (redis, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (redis, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (redis, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (redis, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (redis, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (redis, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (redis, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (redis, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (microsoft-excel, 1.0.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
|
|
JSON arguments recommended for ENTRYPOINT/CMD to prevent unintended behavior related to OS signals:
microsoft-excel/1.0.0/Dockerfile#L26
JSONArgsRecommended: JSON arguments recommended for CMD to prevent unintended behavior related to OS signals
More info: https://docs.docker.com/go/dockerfile/rule/json-args-recommended/
|
|
The 'as' keyword should match the case of the 'from' keyword:
microsoft-excel/1.0.0/Dockerfile#L5
FromAsCasing: 'as' and 'FROM' keywords' casing do not match
More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
|
|
The 'as' keyword should match the case of the 'from' keyword:
microsoft-excel/1.0.0/Dockerfile#L2
FromAsCasing: 'as' and 'FROM' keywords' casing do not match
More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
|
|
main (microsoft-excel, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (microsoft-excel, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (microsoft-excel, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (microsoft-excel, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (microsoft-excel, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (microsoft-excel, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (microsoft-excel, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (microsoft-excel, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (microsoft-excel, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (microsoft-excel, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (microsoft-excel, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (cortex, 1.0.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
|
|
JSON arguments recommended for ENTRYPOINT/CMD to prevent unintended behavior related to OS signals:
cortex/1.0.0/Dockerfile#L26
JSONArgsRecommended: JSON arguments recommended for CMD to prevent unintended behavior related to OS signals
More info: https://docs.docker.com/go/dockerfile/rule/json-args-recommended/
|
|
The 'as' keyword should match the case of the 'from' keyword:
cortex/1.0.0/Dockerfile#L5
FromAsCasing: 'as' and 'FROM' keywords' casing do not match
More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
|
|
The 'as' keyword should match the case of the 'from' keyword:
cortex/1.0.0/Dockerfile#L2
FromAsCasing: 'as' and 'FROM' keywords' casing do not match
More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
|
|
main (cortex, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (cortex, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (cortex, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (cortex, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (cortex, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (cortex, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (cortex, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (cortex, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (cortex, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (cortex, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (cortex, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (gitguardian, 1.0.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
|
|
JSON arguments recommended for ENTRYPOINT/CMD to prevent unintended behavior related to OS signals:
gitguardian/1.0.0/Dockerfile#L26
JSONArgsRecommended: JSON arguments recommended for CMD to prevent unintended behavior related to OS signals
More info: https://docs.docker.com/go/dockerfile/rule/json-args-recommended/
|
|
The 'as' keyword should match the case of the 'from' keyword:
gitguardian/1.0.0/Dockerfile#L5
FromAsCasing: 'as' and 'FROM' keywords' casing do not match
More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
|
|
The 'as' keyword should match the case of the 'from' keyword:
gitguardian/1.0.0/Dockerfile#L2
FromAsCasing: 'as' and 'FROM' keywords' casing do not match
More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
|
|
main (gitguardian, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (gitguardian, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (gitguardian, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (gitguardian, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (gitguardian, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (gitguardian, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (gitguardian, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (gitguardian, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (gitguardian, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (gitguardian, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (gitguardian, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (postgress, 1.0.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
|
|
JSON arguments recommended for ENTRYPOINT/CMD to prevent unintended behavior related to OS signals:
postgress/1.0.0/Dockerfile#L27
JSONArgsRecommended: JSON arguments recommended for CMD to prevent unintended behavior related to OS signals
More info: https://docs.docker.com/go/dockerfile/rule/json-args-recommended/
|
|
The 'as' keyword should match the case of the 'from' keyword:
postgress/1.0.0/Dockerfile#L5
FromAsCasing: 'as' and 'FROM' keywords' casing do not match
More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
|
|
The 'as' keyword should match the case of the 'from' keyword:
postgress/1.0.0/Dockerfile#L2
FromAsCasing: 'as' and 'FROM' keywords' casing do not match
More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
|
|
main (postgress, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (postgress, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (postgress, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (postgress, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (postgress, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (postgress, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (postgress, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (postgress, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (postgress, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (postgress, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (postgress, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (http, 1.4.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
|
|
JSON arguments recommended for ENTRYPOINT/CMD to prevent unintended behavior related to OS signals:
http/1.4.0/Dockerfile#L27
JSONArgsRecommended: JSON arguments recommended for CMD to prevent unintended behavior related to OS signals
More info: https://docs.docker.com/go/dockerfile/rule/json-args-recommended/
|
|
The 'as' keyword should match the case of the 'from' keyword:
http/1.4.0/Dockerfile#L5
FromAsCasing: 'as' and 'FROM' keywords' casing do not match
More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
|
|
The 'as' keyword should match the case of the 'from' keyword:
http/1.4.0/Dockerfile#L2
FromAsCasing: 'as' and 'FROM' keywords' casing do not match
More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
|
|
main (http, 1.4.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (http, 1.4.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (http, 1.4.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (http, 1.4.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (http, 1.4.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (http, 1.4.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (http, 1.4.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (http, 1.4.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (http, 1.4.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (http, 1.4.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (http, 1.4.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (gws, 1.0.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
|
|
JSON arguments recommended for ENTRYPOINT/CMD to prevent unintended behavior related to OS signals:
gws/1.0.0/Dockerfile#L26
JSONArgsRecommended: JSON arguments recommended for CMD to prevent unintended behavior related to OS signals
More info: https://docs.docker.com/go/dockerfile/rule/json-args-recommended/
|
|
The 'as' keyword should match the case of the 'from' keyword:
gws/1.0.0/Dockerfile#L5
FromAsCasing: 'as' and 'FROM' keywords' casing do not match
More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
|
|
The 'as' keyword should match the case of the 'from' keyword:
gws/1.0.0/Dockerfile#L2
FromAsCasing: 'as' and 'FROM' keywords' casing do not match
More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
|
|
main (gws, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (gws, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (gws, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (gws, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (gws, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (gws, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (gws, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (gws, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (gws, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (gws, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (gws, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-waf, 1.0.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
|
|
JSON arguments recommended for ENTRYPOINT/CMD to prevent unintended behavior related to OS signals:
aws-waf/1.0.0/Dockerfile#L26
JSONArgsRecommended: JSON arguments recommended for CMD to prevent unintended behavior related to OS signals
More info: https://docs.docker.com/go/dockerfile/rule/json-args-recommended/
|
|
The 'as' keyword should match the case of the 'from' keyword:
aws-waf/1.0.0/Dockerfile#L5
FromAsCasing: 'as' and 'FROM' keywords' casing do not match
More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
|
|
The 'as' keyword should match the case of the 'from' keyword:
aws-waf/1.0.0/Dockerfile#L2
FromAsCasing: 'as' and 'FROM' keywords' casing do not match
More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
|
|
main (aws-waf, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (rss, 1.0.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
|
|
main (aws-waf, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
JSON arguments recommended for ENTRYPOINT/CMD to prevent unintended behavior related to OS signals:
rss/1.0.0/Dockerfile#L26
JSONArgsRecommended: JSON arguments recommended for CMD to prevent unintended behavior related to OS signals
More info: https://docs.docker.com/go/dockerfile/rule/json-args-recommended/
|
|
main (aws-waf, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
The 'as' keyword should match the case of the 'from' keyword:
rss/1.0.0/Dockerfile#L5
FromAsCasing: 'as' and 'FROM' keywords' casing do not match
More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
|
|
The 'as' keyword should match the case of the 'from' keyword:
rss/1.0.0/Dockerfile#L2
FromAsCasing: 'as' and 'FROM' keywords' casing do not match
More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
|
|
main (aws-waf, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (rss, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-waf, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-waf, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-waf, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (rss, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-waf, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-waf, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-waf, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (rss, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-waf, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (rss, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (rss, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (rss, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (rss, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (rss, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (rss, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (rss, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (rss, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (shuffle-subflow, 1.1.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
|
|
JSON arguments recommended for ENTRYPOINT/CMD to prevent unintended behavior related to OS signals:
shuffle-subflow/1.1.0/Dockerfile#L26
JSONArgsRecommended: JSON arguments recommended for CMD to prevent unintended behavior related to OS signals
More info: https://docs.docker.com/go/dockerfile/rule/json-args-recommended/
|
|
The 'as' keyword should match the case of the 'from' keyword:
shuffle-subflow/1.1.0/Dockerfile#L5
FromAsCasing: 'as' and 'FROM' keywords' casing do not match
More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
|
|
The 'as' keyword should match the case of the 'from' keyword:
shuffle-subflow/1.1.0/Dockerfile#L2
FromAsCasing: 'as' and 'FROM' keywords' casing do not match
More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
|
|
main (shuffle-subflow, 1.1.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (shuffle-subflow, 1.1.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (shuffle-subflow, 1.1.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (shuffle-subflow, 1.1.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (shuffle-subflow, 1.1.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (shuffle-subflow, 1.1.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (shuffle-subflow, 1.1.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (shuffle-subflow, 1.1.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (shuffle-subflow, 1.1.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (shuffle-subflow, 1.1.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (shuffle-subflow, 1.1.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (archive-today, 1.0.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
|
|
JSON arguments recommended for ENTRYPOINT/CMD to prevent unintended behavior related to OS signals:
archive-today/1.0.0/Dockerfile#L26
JSONArgsRecommended: JSON arguments recommended for CMD to prevent unintended behavior related to OS signals
More info: https://docs.docker.com/go/dockerfile/rule/json-args-recommended/
|
|
The 'as' keyword should match the case of the 'from' keyword:
archive-today/1.0.0/Dockerfile#L5
FromAsCasing: 'as' and 'FROM' keywords' casing do not match
More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
|
|
The 'as' keyword should match the case of the 'from' keyword:
archive-today/1.0.0/Dockerfile#L2
FromAsCasing: 'as' and 'FROM' keywords' casing do not match
More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
|
|
main (archive-today, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (archive-today, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (archive-today, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (archive-today, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (archive-today, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (archive-today, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (archive-today, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (archive-today, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (archive-today, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (archive-today, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (archive-today, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (google-chat, 1.0.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
|
|
The 'as' keyword should match the case of the 'from' keyword:
google-chat/1.0.0/Dockerfile#L5
FromAsCasing: 'as' and 'FROM' keywords' casing do not match
More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
|
|
The 'as' keyword should match the case of the 'from' keyword:
google-chat/1.0.0/Dockerfile#L2
FromAsCasing: 'as' and 'FROM' keywords' casing do not match
More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
|
|
JSON arguments recommended for ENTRYPOINT/CMD to prevent unintended behavior related to OS signals:
google-chat/1.0.0/Dockerfile#L26
JSONArgsRecommended: JSON arguments recommended for CMD to prevent unintended behavior related to OS signals
More info: https://docs.docker.com/go/dockerfile/rule/json-args-recommended/
|
|
main (google-chat, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (google-chat, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (google-chat, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (google-chat, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (google-chat, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (google-chat, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (google-chat, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (google-chat, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (google-chat, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (google-chat, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (google-chat, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-lambda, 1.0.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
|
|
JSON arguments recommended for ENTRYPOINT/CMD to prevent unintended behavior related to OS signals:
aws-lambda/1.0.0/Dockerfile#L26
JSONArgsRecommended: JSON arguments recommended for CMD to prevent unintended behavior related to OS signals
More info: https://docs.docker.com/go/dockerfile/rule/json-args-recommended/
|
|
The 'as' keyword should match the case of the 'from' keyword:
aws-lambda/1.0.0/Dockerfile#L5
FromAsCasing: 'as' and 'FROM' keywords' casing do not match
More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
|
|
The 'as' keyword should match the case of the 'from' keyword:
aws-lambda/1.0.0/Dockerfile#L2
FromAsCasing: 'as' and 'FROM' keywords' casing do not match
More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
|
|
main (aws-lambda, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-lambda, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-lambda, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-lambda, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-lambda, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-lambda, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-lambda, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-lambda, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-lambda, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-lambda, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-lambda, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (snort3, 1.0.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
|
|
main (snort3, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (snort3, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (snort3, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (snort3, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (snort3, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (snort3, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (snort3, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (snort3, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (snort3, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (snort3, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (snort3, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (checkpoint, 1.0.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
|
|
JSON arguments recommended for ENTRYPOINT/CMD to prevent unintended behavior related to OS signals:
checkpoint/1.0.0/Dockerfile#L26
JSONArgsRecommended: JSON arguments recommended for CMD to prevent unintended behavior related to OS signals
More info: https://docs.docker.com/go/dockerfile/rule/json-args-recommended/
|
|
The 'as' keyword should match the case of the 'from' keyword:
checkpoint/1.0.0/Dockerfile#L5
FromAsCasing: 'as' and 'FROM' keywords' casing do not match
More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
|
|
The 'as' keyword should match the case of the 'from' keyword:
checkpoint/1.0.0/Dockerfile#L2
FromAsCasing: 'as' and 'FROM' keywords' casing do not match
More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
|
|
main (checkpoint, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (checkpoint, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (checkpoint, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (checkpoint, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (checkpoint, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (checkpoint, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (checkpoint, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (checkpoint, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (checkpoint, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (checkpoint, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (checkpoint, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-dynamodb, 1.0.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
|
|
JSON arguments recommended for ENTRYPOINT/CMD to prevent unintended behavior related to OS signals:
aws-dynamodb/1.0.0/Dockerfile#L26
JSONArgsRecommended: JSON arguments recommended for CMD to prevent unintended behavior related to OS signals
More info: https://docs.docker.com/go/dockerfile/rule/json-args-recommended/
|
|
The 'as' keyword should match the case of the 'from' keyword:
aws-dynamodb/1.0.0/Dockerfile#L5
FromAsCasing: 'as' and 'FROM' keywords' casing do not match
More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
|
|
The 'as' keyword should match the case of the 'from' keyword:
aws-dynamodb/1.0.0/Dockerfile#L2
FromAsCasing: 'as' and 'FROM' keywords' casing do not match
More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
|
|
main (aws-dynamodb, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-dynamodb, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (vader, 1.0.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
|
|
JSON arguments recommended for ENTRYPOINT/CMD to prevent unintended behavior related to OS signals:
vader/1.0.0/Dockerfile#L26
JSONArgsRecommended: JSON arguments recommended for CMD to prevent unintended behavior related to OS signals
More info: https://docs.docker.com/go/dockerfile/rule/json-args-recommended/
|
|
The 'as' keyword should match the case of the 'from' keyword:
vader/1.0.0/Dockerfile#L5
FromAsCasing: 'as' and 'FROM' keywords' casing do not match
More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
|
|
main (aws-dynamodb, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
The 'as' keyword should match the case of the 'from' keyword:
vader/1.0.0/Dockerfile#L2
FromAsCasing: 'as' and 'FROM' keywords' casing do not match
More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
|
|
main (vader, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (vader, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-dynamodb, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (vader, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (vader, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (vader, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (vader, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-dynamodb, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (vader, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (vader, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (vader, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (vader, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-dynamodb, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (vader, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-dynamodb, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-dynamodb, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-dynamodb, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-dynamodb, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-dynamodb, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (outlook-exchange, 1.0.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
|
|
main (outlook-exchange, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (outlook-exchange, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (outlook-exchange, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (outlook-exchange, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (outlook-exchange, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (outlook-exchange, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (outlook-exchange, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (outlook-exchange, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (outlook-exchange, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (outlook-exchange, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (outlook-exchange, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (gpg-tools, 1.0.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
|
|
The 'as' keyword should match the case of the 'from' keyword:
gpg-tools/1.0.0/Dockerfile#L5
FromAsCasing: 'as' and 'FROM' keywords' casing do not match
More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
|
|
The 'as' keyword should match the case of the 'from' keyword:
gpg-tools/1.0.0/Dockerfile#L2
FromAsCasing: 'as' and 'FROM' keywords' casing do not match
More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
|
|
JSON arguments recommended for ENTRYPOINT/CMD to prevent unintended behavior related to OS signals:
gpg-tools/1.0.0/Dockerfile#L26
JSONArgsRecommended: JSON arguments recommended for CMD to prevent unintended behavior related to OS signals
More info: https://docs.docker.com/go/dockerfile/rule/json-args-recommended/
|
|
main (gpg-tools, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (gpg-tools, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (gpg-tools, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (gpg-tools, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (gpg-tools, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (gpg-tools, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (gpg-tools, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (gpg-tools, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (gpg-tools, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (gpg-tools, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (gpg-tools, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-ses, 1.0.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
|
|
JSON arguments recommended for ENTRYPOINT/CMD to prevent unintended behavior related to OS signals:
aws-ses/1.0.0/Dockerfile#L26
JSONArgsRecommended: JSON arguments recommended for CMD to prevent unintended behavior related to OS signals
More info: https://docs.docker.com/go/dockerfile/rule/json-args-recommended/
|
|
The 'as' keyword should match the case of the 'from' keyword:
aws-ses/1.0.0/Dockerfile#L5
FromAsCasing: 'as' and 'FROM' keywords' casing do not match
More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
|
|
The 'as' keyword should match the case of the 'from' keyword:
aws-ses/1.0.0/Dockerfile#L2
FromAsCasing: 'as' and 'FROM' keywords' casing do not match
More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
|
|
main (aws-ses, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-ses, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-ses, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-ses, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-ses, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-ses, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-ses, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-ses, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-ses, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-ses, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-ses, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (shuffle-ai, 1.1.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
|
|
Legacy key/value format with whitespace separator should not be used:
shuffle-ai/1.1.0/Dockerfile#L24
LegacyKeyValueFormat: "ENV key=value" should be used instead of legacy "ENV key value" format
More info: https://docs.docker.com/go/dockerfile/rule/legacy-key-value-format/
|
|
Legacy key/value format with whitespace separator should not be used:
shuffle-ai/1.1.0/Dockerfile#L23
LegacyKeyValueFormat: "ENV key=value" should be used instead of legacy "ENV key value" format
More info: https://docs.docker.com/go/dockerfile/rule/legacy-key-value-format/
|
|
main (shuffle-ai, 1.1.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (shuffle-ai, 1.1.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (shuffle-ai, 1.1.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (shuffle-ai, 1.1.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (shuffle-ai, 1.1.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (shuffle-ai, 1.1.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (shuffle-ai, 1.1.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (shuffle-ai, 1.1.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (shuffle-ai, 1.1.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (shuffle-ai, 1.1.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (shuffle-ai, 1.1.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (gpg-tools, 1.1.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
|
|
JSON arguments recommended for ENTRYPOINT/CMD to prevent unintended behavior related to OS signals:
gpg-tools/1.1.0/Dockerfile#L26
JSONArgsRecommended: JSON arguments recommended for CMD to prevent unintended behavior related to OS signals
More info: https://docs.docker.com/go/dockerfile/rule/json-args-recommended/
|
|
The 'as' keyword should match the case of the 'from' keyword:
gpg-tools/1.1.0/Dockerfile#L5
FromAsCasing: 'as' and 'FROM' keywords' casing do not match
More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
|
|
The 'as' keyword should match the case of the 'from' keyword:
gpg-tools/1.1.0/Dockerfile#L2
FromAsCasing: 'as' and 'FROM' keywords' casing do not match
More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
|
|
main (gpg-tools, 1.1.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (gpg-tools, 1.1.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (gpg-tools, 1.1.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (gpg-tools, 1.1.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (gpg-tools, 1.1.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (gpg-tools, 1.1.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (gpg-tools, 1.1.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (gpg-tools, 1.1.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (gpg-tools, 1.1.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (gpg-tools, 1.1.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (gpg-tools, 1.1.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-cloudwatch, 1.0.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
|
|
The 'as' keyword should match the case of the 'from' keyword:
aws-cloudwatch/1.0.0/Dockerfile#L5
FromAsCasing: 'as' and 'FROM' keywords' casing do not match
More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
|
|
The 'as' keyword should match the case of the 'from' keyword:
aws-cloudwatch/1.0.0/Dockerfile#L2
FromAsCasing: 'as' and 'FROM' keywords' casing do not match
More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
|
|
JSON arguments recommended for ENTRYPOINT/CMD to prevent unintended behavior related to OS signals:
aws-cloudwatch/1.0.0/Dockerfile#L26
JSONArgsRecommended: JSON arguments recommended for CMD to prevent unintended behavior related to OS signals
More info: https://docs.docker.com/go/dockerfile/rule/json-args-recommended/
|
|
main (aws-cloudwatch, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-cloudwatch, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-cloudwatch, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-cloudwatch, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-cloudwatch, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-cloudwatch, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-cloudwatch, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-cloudwatch, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-cloudwatch, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-cloudwatch, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-cloudwatch, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-securityhub, 1.0.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
|
|
JSON arguments recommended for ENTRYPOINT/CMD to prevent unintended behavior related to OS signals:
aws-securityhub/1.0.0/Dockerfile#L26
JSONArgsRecommended: JSON arguments recommended for CMD to prevent unintended behavior related to OS signals
More info: https://docs.docker.com/go/dockerfile/rule/json-args-recommended/
|
|
The 'as' keyword should match the case of the 'from' keyword:
aws-securityhub/1.0.0/Dockerfile#L5
FromAsCasing: 'as' and 'FROM' keywords' casing do not match
More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
|
|
The 'as' keyword should match the case of the 'from' keyword:
aws-securityhub/1.0.0/Dockerfile#L2
FromAsCasing: 'as' and 'FROM' keywords' casing do not match
More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
|
|
main (aws-securityhub, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-securityhub, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-securityhub, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-securityhub, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-securityhub, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-securityhub, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-securityhub, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-securityhub, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-securityhub, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-securityhub, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (aws-securityhub, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (harfanglab-edr, 1.0.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
|
|
JSON arguments recommended for ENTRYPOINT/CMD to prevent unintended behavior related to OS signals:
harfanglab-edr/1.0.0/Dockerfile#L26
JSONArgsRecommended: JSON arguments recommended for CMD to prevent unintended behavior related to OS signals
More info: https://docs.docker.com/go/dockerfile/rule/json-args-recommended/
|
|
The 'as' keyword should match the case of the 'from' keyword:
harfanglab-edr/1.0.0/Dockerfile#L5
FromAsCasing: 'as' and 'FROM' keywords' casing do not match
More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
|
|
The 'as' keyword should match the case of the 'from' keyword:
harfanglab-edr/1.0.0/Dockerfile#L2
FromAsCasing: 'as' and 'FROM' keywords' casing do not match
More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
|
|
main (harfanglab-edr, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (harfanglab-edr, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (harfanglab-edr, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (harfanglab-edr, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (harfanglab-edr, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (harfanglab-edr, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (harfanglab-edr, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (harfanglab-edr, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (harfanglab-edr, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (harfanglab-edr, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (harfanglab-edr, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (shuffle-tools, 1.2.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
|
|
The 'as' keyword should match the case of the 'from' keyword:
shuffle-tools/1.2.0/Dockerfile#L5
FromAsCasing: 'as' and 'FROM' keywords' casing do not match
More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
|
|
The 'as' keyword should match the case of the 'from' keyword:
shuffle-tools/1.2.0/Dockerfile#L2
FromAsCasing: 'as' and 'FROM' keywords' casing do not match
More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
|
|
main (shuffle-tools, 1.2.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (shuffle-tools, 1.2.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (shuffle-tools, 1.2.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (shuffle-tools, 1.2.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (shuffle-tools, 1.2.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (shuffle-tools, 1.2.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (shuffle-tools, 1.2.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (shuffle-tools, 1.2.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (shuffle-tools, 1.2.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (shuffle-tools, 1.2.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (shuffle-tools, 1.2.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (yara, 1.0.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
|
|
The 'as' keyword should match the case of the 'from' keyword:
yara/1.0.0/Dockerfile#L5
FromAsCasing: 'as' and 'FROM' keywords' casing do not match
More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
|
|
The 'as' keyword should match the case of the 'from' keyword:
yara/1.0.0/Dockerfile#L2
FromAsCasing: 'as' and 'FROM' keywords' casing do not match
More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
|
|
JSON arguments recommended for ENTRYPOINT/CMD to prevent unintended behavior related to OS signals:
yara/1.0.0/Dockerfile#L60
JSONArgsRecommended: JSON arguments recommended for CMD to prevent unintended behavior related to OS signals
More info: https://docs.docker.com/go/dockerfile/rule/json-args-recommended/
|
|
Legacy key/value format with whitespace separator should not be used:
yara/1.0.0/Dockerfile#L24
LegacyKeyValueFormat: "ENV key=value" should be used instead of legacy "ENV key value" format
More info: https://docs.docker.com/go/dockerfile/rule/legacy-key-value-format/
|
|
Legacy key/value format with whitespace separator should not be used:
yara/1.0.0/Dockerfile#L23
LegacyKeyValueFormat: "ENV key=value" should be used instead of legacy "ENV key value" format
More info: https://docs.docker.com/go/dockerfile/rule/legacy-key-value-format/
|
|
main (yara, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (yara, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (yara, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (yara, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (yara, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (yara, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (yara, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (yara, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (yara, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (yara, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
main (yara, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
Artifacts
Produced during runtime
| Name | Size | Digest | |
|---|---|---|---|
|
Shuffle~python-apps~04JIX3.dockerbuild
|
98.3 KB |
sha256:14a737a49a4907334e254893fe8a053545503ae2573908877a45d590df3f07d8
|
|
|
Shuffle~python-apps~1XOQHX.dockerbuild
|
102 KB |
sha256:9f985a5ecb0070cda28f236b23a0d869dcd6227e9ede3b42a01cdfa4b54b9478
|
|
|
Shuffle~python-apps~31UTUD.dockerbuild
|
99.5 KB |
sha256:e2531441306ed0a387e8a7293b753f018be9c8c91109513f9115453a57549d89
|
|
|
Shuffle~python-apps~4KGMBG.dockerbuild
|
104 KB |
sha256:cf5d494aa5e79f65bd42055db6d063305cd59bce9d18b28f1eedc0ccd0a7280c
|
|
|
Shuffle~python-apps~4YCLXP.dockerbuild
|
80.8 KB |
sha256:e45e9828336351e75e603a64f979d5cd2a251225710502b8cc5721daf9116de6
|
|
|
Shuffle~python-apps~715W4H.dockerbuild
|
102 KB |
sha256:dd8372fadc5050d1fd78843d79d156ee61903be1dbb886b0906d4a2e9d7f9652
|
|
|
Shuffle~python-apps~9LX6HK.dockerbuild
|
103 KB |
sha256:4467d76246f0f6df346960405e2a1fd9040f79c171a017c0b653d76e2c533ea5
|
|
|
Shuffle~python-apps~AANS36.dockerbuild
|
97.1 KB |
sha256:d621a2592697479fc65462cb70426a71e47497d01512ddef599ea6602d4c06c2
|
|
|
Shuffle~python-apps~B0AN2T.dockerbuild
|
105 KB |
sha256:ce2a33b487ca99aa1b524e754e2e98b514dbac046bb5b9f8746cda30a76e9826
|
|
|
Shuffle~python-apps~BS26Q6.dockerbuild
|
111 KB |
sha256:915390d0d710665e439c7de60940f82d335d58dcb7fc4a987eeff4901e072b2e
|
|
|
Shuffle~python-apps~C3MQCP.dockerbuild
|
101 KB |
sha256:96cb49c3080bba7e9418ccdb6fea50cc741b5fc5e4e3135fa63a10cddcc947bd
|
|
|
Shuffle~python-apps~CGIIM9.dockerbuild
|
107 KB |
sha256:44a56ff7dccf2363f37647cf71875c529296a5a276938ccfe4de68d1636c92e8
|
|
|
Shuffle~python-apps~CIG216.dockerbuild
|
98.8 KB |
sha256:7072f90b31acb2635a0f713a8ffa72600d5b2e409b028bd3b7cc194e992459c2
|
|
|
Shuffle~python-apps~DVLZ8A.dockerbuild
|
103 KB |
sha256:faac0366c17bf21269cf76d8b5d5b6bdf7f132d8a1d11ae3d110013fd61ad02f
|
|
|
Shuffle~python-apps~ELRJFP.dockerbuild
|
179 KB |
sha256:15679061a9265edd85e3bfc582043ca83bbc75bd3f506acabc559c1371cd7990
|
|
|
Shuffle~python-apps~FZSMUN.dockerbuild
|
97 KB |
sha256:ca2f4ea268b869826295e4902e90c6f7da732e28d5a76f5026325f1d26e38965
|
|
|
Shuffle~python-apps~KWJ9F2.dockerbuild
|
102 KB |
sha256:b874511dac18d8e8e407b72d2614eb8501cce7f02ebd6b6ee91fde21ec70d7f6
|
|
|
Shuffle~python-apps~KXB2TK.dockerbuild
|
103 KB |
sha256:1d9871d2a80a6c4dfc73850874f501c9a3704aff9a7d7d6305cc08a5125f3acf
|
|
|
Shuffle~python-apps~L1R288.dockerbuild
|
102 KB |
sha256:62c4cc7915df8955fbb0780274fc4340a5b5f28f36e941f0680995e9b3c135e8
|
|
|
Shuffle~python-apps~L4VM4X.dockerbuild
|
103 KB |
sha256:d4a364761b843b1a586641e94fc756f88ef1a10a6f05e425d45384229155ca37
|
|
|
Shuffle~python-apps~MV25HY.dockerbuild
|
114 KB |
sha256:62187675c6ec13763c133152865340c364afca551103ae7cad16b573e11b099d
|
|
|
Shuffle~python-apps~N3W0D6.dockerbuild
|
108 KB |
sha256:8886f690f7e0b588dc7e2e26867a4cf8ea817243d494f5336b210870ea0d3686
|
|
|
Shuffle~python-apps~NC7YR4.dockerbuild
|
103 KB |
sha256:daed660d21722ffee97df66a6e2984cfbe36ef766c3ae666be2ee9efa1bea5bf
|
|
|
Shuffle~python-apps~NPFJQF.dockerbuild
|
102 KB |
sha256:26557435ff5605759d6a9721e4736d8f7ef51a0af6f726275224f054e8cca30f
|
|
|
Shuffle~python-apps~NXG3O1.dockerbuild
|
106 KB |
sha256:8aab0aa2babbae41b667f14f9d32e2b01b9809f37d49c5d9ed7be2ba280aa8c8
|
|
|
Shuffle~python-apps~PW265Q.dockerbuild
|
105 KB |
sha256:329d07a28f876216c6b47802381f38eb73cd027b0aa682452d401dd886d86ba8
|
|
|
Shuffle~python-apps~Q9FCKW.dockerbuild
|
100 KB |
sha256:ff16b1cdb058fdbd4e13c62e3c2106a50fd06ddee656172862c891e0d298f214
|
|
|
Shuffle~python-apps~RI3UHQ.dockerbuild
|
104 KB |
sha256:d809b2843418174a91a245be0cef88d1b3087e257772640fd2608a29f9a18fe5
|
|
|
Shuffle~python-apps~RK3NPC.dockerbuild
|
107 KB |
sha256:beede6e299789cc244d45a9032f5a7a795c4e0ea5e19d58b0b98f0c7cdf2aa68
|
|
|
Shuffle~python-apps~S926QQ.dockerbuild
|
36 KB |
sha256:a934ad507d708921bd63ff99f5e47637afe0cd9670e2dbe92bcc178fe3a146dd
|
|
|
Shuffle~python-apps~SCBWVZ.dockerbuild
|
103 KB |
sha256:5eaeec2d8d8540f03b0d32e187474c81cdcfabbe0d235ff7cc4e01aa29710db8
|
|
|
Shuffle~python-apps~SO8FZE.dockerbuild
|
104 KB |
sha256:6fb4607d28dfe3b22a8586f17bb0e353742de2103ceb4b08d64249292229c866
|
|
|
Shuffle~python-apps~SQUKR5.dockerbuild
|
218 KB |
sha256:f05e768a8deb9bbd4113ded36be8988a33ab02a14328ccd2197a52b70d944187
|
|
|
Shuffle~python-apps~SZ8LIV.dockerbuild
|
36.3 KB |
sha256:9851556b4f5eb027c57309af4c08c5099e4694850b338ab71cbcb5dea6fb104d
|
|
|
Shuffle~python-apps~T777G1.dockerbuild
|
103 KB |
sha256:acb34431cc625cddb6c6956ad581305861501a31b63be835ee34c3e2011aa547
|
|
|
Shuffle~python-apps~TVOL0L.dockerbuild
|
93.8 KB |
sha256:92c0a66040e618daa337ce4e8ccfefae35d7448433642487e75da4fbe66e0d78
|
|
|
Shuffle~python-apps~UEDY7I.dockerbuild
|
102 KB |
sha256:e16538fcbd996e6b3f4cf1e50d609a2d3daae3480187f334c6e5d4aa20cfde22
|
|
|
Shuffle~python-apps~VV96GE.dockerbuild
|
101 KB |
sha256:f24d13e1a06d6091df47610021ddb176c0a9dabee2e5b4da71134972488bd70b
|
|
|
Shuffle~python-apps~WAMSX2.dockerbuild
|
94.3 KB |
sha256:433f5a6584be1ec67a753c597cbc2eb3bf0bbe116b43656c40f6bbc60ba04c3c
|
|
|
Shuffle~python-apps~WQQTFS.dockerbuild
|
104 KB |
sha256:e19f3151f4236d7a957c20e4428c66dd9327ee91a2f8aa647a5ee26c49db9f73
|
|
|
Shuffle~python-apps~X63SCH.dockerbuild
|
97.4 KB |
sha256:8ad45aff58ba52db838e76252c8448f140c393f7ed2411f2ce223c5a8f7f84a8
|
|
|
Shuffle~python-apps~XFSLFW.dockerbuild
|
104 KB |
sha256:e9d1e49294519cc4f06a3cff301ad79cbf797c8859362d3a42b27dd1bc4db97c
|
|
|
Shuffle~python-apps~YB8RVP.dockerbuild
|
95.5 KB |
sha256:1cde4413b31769e43c38e8bffeaf133b73656d6a63ee0e53aae292aa1c8b23a1
|
|
|
Shuffle~python-apps~YOWQ2Q.dockerbuild
|
106 KB |
sha256:69a1642f2a1821cec7e3d550b99559cae063b517f65a3d5b3cc3645e9d9f98a7
|
|
|
Shuffle~python-apps~YSCLXA.dockerbuild
|
87.9 KB |
sha256:05332fabf3e5d2dd807cd1452239019a4209826c2054d1bdd97f9c0bc3506d53
|
|
|
Shuffle~python-apps~Z1R616.dockerbuild
|
105 KB |
sha256:f4e2a444c578c9998d8f90235d2c9fe0020fffb266c31dba65e2671afc9eac7b
|
|
|
Shuffle~python-apps~ZR4MO0.dockerbuild
|
40.6 KB |
sha256:efa96b0cfa19961d3a1447d65385f923b85906eb1a5bcfb77fae49d9640f29ce
|
|