ZiGate v1 support status

[ruimarinho]

Hi @badzz,

Is this project compatible with ZiGate v1 (USB) device?

[pipiche38]

Yes it is. it was developped on the V1

[ruimarinho]

I am unable to flash the published binaries with:

JennicModuleProgrammer -V 6 -P 115200 -e -f Router_NtagIcode_JN5179_DR1175.bin -s /dev/cu.usbserial-0001
JennicModuleProgrammer -V 6 -P 115200 -e -f Router_NtagIcode_JN5169_DR1175.bin -s /dev/cu.usbserial-0001

Says the hardware isn't compatible. Any ideas?

[pipiche38]

And I beleive the ZiGate is in flash mode ?
My understanding is that you should use the JN5169 (which is the ZIGate chipset)

Anything displayed when you issue the JennicModuleProgrammer command that you could share ?

[ruimarinho]

Yep.

JennicModuleProgrammer Version: 0.7(r56124)
Setting baudrate: 115200
Detected Chip: Unknown
MAC Address:   00:15:8D:00:01:ED:46:B0
Opened firmware file size 154780
Module uses Bootloader v2 Header
Incompatible firmware (Built for 0x0f03000b, Device is 0x07030008)

[pipiche38]

@badzz ZiGate V1 are based on JN5168, where can we find the router firmware for the JN5168 ?
@ruimarinho if you are able to build the firmware ? if so you need to use JN5168 instead of JN5169

[badzz]

Hi, those files were leftover , they should not be used
You have to compile this code to have your firmware
I will try to see if I can upload them.

[badzz]

https://github.com/badzz/Zigate-Router/releases

[ruimarinho]

@badzz thank you! How does pairing work?

[pipiche38]

My understanding is you put the Zigate / Plugin in pairing mode, and then switch on the ZiGate-Router. Then it mostlikely that the host application must somehow handle it.

If you need to repair, I think that there is no other alternative to reflash the firmware with erase eeprom in order to reset it

[ruimarinho]

Ok, it probably starts in pairing mode at boot. Would be cool to be able to press the flash "button" to put it in pairing mode again.

[pipiche38]

Yes, it is definitely a good idea, but I think the purpose was to get something quickly to also convert some ZiGate V1 and reuse them .
Maybe someone will do it later .

[badzz]

Ok, it probably starts in pairing mode at boot. Would be cool to be able to press the flash "button" to put it in pairing mode again.

There is no way to do this as the button is hard wired for flashing..anyway that's what I understand of the zigate pcb

[badzz]

My understanding is you put the Zigate / Plugin in pairing mode, and then switch on the ZiGate-Router. Then it mostlikely that the host application must somehow handle it.

If you need to repair, I think that there is no other alternative to reflash the firmware with erase eeprom in order to reset it

Yep. Erase eeprom should be enough.
It is really a prototype more than anything else.

[ruimarinho]

Unfortunately it seems like ZHA can't handle the router very well. Not even LQI is reported and some cluster commands are unavailable.

2021-10-14 12:17:38 INFO (MainThread) [zigpy_znp.zigbee.application] Permitting joins for 60 seconds
2021-10-14 12:17:38 DEBUG (MainThread) [zigpy_znp.zigbee.application] Intercepted a ZDO request: dst_addr=AddrModeAddress(mode=<AddrMode.Broadcast: 15>, address=0xFFFC), dst_ep=0, src_ep=0, cluster=54, sequence=124, options=TransmitOptions.NONE, radius=0, data=b'|<\x00'
2021-10-14 12:17:38 DEBUG (MainThread) [zigpy_znp.zigbee.application] Intercepted AP ZDO request 54({'PermitDuration': 60, 'TC_Significant': <Bool.false: 0>}) and replaced with ZDO.MgmtPermitJoinReq.Req(AddrMode=<AddrMode.Broadcast: 15>, Dst=0xFFFC, Duration=60, TCSignificance=0)
2021-10-14 12:17:38 DEBUG (MainThread) [zigpy_znp.api] Sending request: ZDO.MgmtPermitJoinReq.Req(AddrMode=<AddrMode.Broadcast: 15>, Dst=0xFFFC, Duration=60, TCSignificance=0)
2021-10-14 12:17:38 DEBUG (MainThread) [zigpy_znp.api] Received command: ZDO.MgmtPermitJoinReq.Rsp(Status=<Status.SUCCESS: 0>)
2021-10-14 12:17:38 DEBUG (MainThread) [zigpy_znp.api] Received command: ZDO.MgmtPermitJoinRsp.Callback(Src=0x0000, Status=<Status.SUCCESS: 0>)
2021-10-14 12:17:49 DEBUG (MainThread) [zigpy_znp.api] Received command: ZDO.TCDevInd.Callback(SrcNwk=0xCBEF, SrcIEEE=00:15:8d:00:01:ed:46:b0, ParentNwk=0x0000)
2021-10-14 12:17:49 INFO (MainThread) [zigpy_znp.zigbee.application] TC device join: ZDO.TCDevInd.Callback(SrcNwk=0xCBEF, SrcIEEE=00:15:8d:00:01:ed:46:b0, ParentNwk=0x0000)
2021-10-14 12:17:49 INFO (MainThread) [zigpy.application] Device 0xcbef (00:15:8d:00:01:ed:46:b0) joined the network
2021-10-14 12:17:49 DEBUG (MainThread) [zigpy.application] Device 00:15:8d:00:01:ed:46:b0 changed id (0xcbef => 0xcbef)
2021-10-14 12:17:49 DEBUG (MainThread) [zigpy.device] [0xcbef] Skipping initialization, device is fully initialized
2021-10-14 12:17:49 DEBUG (MainThread) [zigpy.application] Device is initialized <Device model='Zigate-Router' manuf='NXP' nwk=0xCBEF ieee=00:15:8d:00:01:ed:46:b0 is_initialized=True>
2021-10-14 12:17:49 DEBUG (MainThread) [zigpy.quirks.registry] Checking quirks for NXP Zigate-Router (00:15:8d:00:01:ed:46:b0)
2021-10-14 12:17:49 DEBUG (MainThread) [zigpy.quirks.registry] Considering <class 'zhaquirks.xbee.xbee_io.XBeeSensor'>
2021-10-14 12:17:49 DEBUG (MainThread) [zigpy.quirks.registry] Fail because endpoint list mismatch: {232, 230} {1}
2021-10-14 12:17:49 DEBUG (MainThread) [zigpy.quirks.registry] Considering <class 'zhaquirks.xbee.xbee3_io.XBee3Sensor'>
2021-10-14 12:17:49 DEBUG (MainThread) [zigpy.quirks.registry] Fail because endpoint list mismatch: {232, 230} {1}
2021-10-14 12:17:49 DEBUG (MainThread) [zigpy.quirks.registry] Considering <class 'zhaquirks.smartthings.tag_v4.SmartThingsTagV4'>
2021-10-14 12:17:49 DEBUG (MainThread) [zigpy.quirks.registry] Fail because device_type mismatch on at least one endpoint
2021-10-14 12:17:49 DEBUG (MainThread) [zigpy.quirks.registry] Considering <class 'zhaquirks.smartthings.multi.SmartthingsMultiPurposeSensor'>
2021-10-14 12:17:49 DEBUG (MainThread) [zigpy.quirks.registry] Fail because device_type mismatch on at least one endpoint
2021-10-14 12:17:49 DEBUG (MainThread) [zigpy.quirks.registry] Considering <class 'zhaquirks.netvox.z308e3ed.Z308E3ED'>
2021-10-14 12:17:49 DEBUG (MainThread) [zigpy.quirks.registry] Fail because device_type mismatch on at least one endpoint
2021-10-14 12:17:49 DEBUG (MainThread) [zigpy.quirks.registry] Considering <class 'zhaquirks.gledopto.soposhgu10.SoposhGU10'>
2021-10-14 12:17:49 DEBUG (MainThread) [zigpy.quirks.registry] Fail because endpoint list mismatch: {11, 13} {1}
2021-10-14 12:17:49 DEBUG (MainThread) [zigpy.quirks.registry] Considering <class 'bellows.zigbee.application.EZSPCoordinator'>
2021-10-14 12:17:49 DEBUG (MainThread) [zigpy.quirks.registry] Fail because device_type mismatch on at least one endpoint
2021-10-14 12:17:49 DEBUG (MainThread) [zigpy_znp.api] Sending request: ZDO.ExtRouteDisc.Req(Dst=0xCBEF, Options=<RouteDiscoveryOptions.UNICAST: 0>, Radius=30)
2021-10-14 12:17:49 DEBUG (MainThread) [homeassistant.components.zha.core.gateway] device - 0xCBEF:00:15:8d:00:01:ed:46:b0 entering async_device_initialized - is_new_join: False
2021-10-14 12:17:49 DEBUG (MainThread) [homeassistant.components.zha.core.gateway] device - 0xCBEF:00:15:8d:00:01:ed:46:b0 has been reset and re-added or its nwk address changed
2021-10-14 12:17:49 DEBUG (MainThread) [homeassistant.components.zha.core.gateway] skipping discovery for previously discovered device - 0xCBEF:00:15:8d:00:01:ed:46:b0
2021-10-14 12:17:49 DEBUG (MainThread) [homeassistant.components.zha.core.device] [0xCBEF](Zigate-Router): started configuration
2021-10-14 12:17:49 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0xCBEF:ZDO](Zigate-Router): 'async_configure' stage succeeded
2021-10-14 12:17:49 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0xCBEF:1:0x0000]: finished channel configuration
2021-10-14 12:17:49 DEBUG (MainThread) [zigpy_znp.api] Received command: ZDO.ExtRouteDisc.Rsp(Status=<Status.SUCCESS: 0>)
2021-10-14 12:17:49 DEBUG (MainThread) [zigpy_znp.api] Sending request: ZDO.ExtRouteChk.Req(Dst=0xCBEF, RtStatus=<RouteStatus.ACTIVE: 1>, Options=<RouteOptions.NO_ROUTE_CACHE|MTO_ROUTE: 3>)
2021-10-14 12:17:49 DEBUG (MainThread) [zigpy_znp.api] Received command: ZDO.EndDeviceAnnceInd.Callback(Src=0xCBEF, NWK=0xCBEF, IEEE=00:15:8d:00:01:ed:46:b0, Capabilities=<MACCapabilities.AllocateShortAddrDuringAssocNeeded|RXWhenIdle|MainsPowered|Router: 142>)
2021-10-14 12:17:49 INFO (MainThread) [zigpy_znp.zigbee.application] ZDO device announce: ZDO.EndDeviceAnnceInd.Callback(Src=0xCBEF, NWK=0xCBEF, IEEE=00:15:8d:00:01:ed:46:b0, Capabilities=<MACCapabilities.AllocateShortAddrDuringAssocNeeded|RXWhenIdle|MainsPowered|Router: 142>)
2021-10-14 12:17:49 INFO (MainThread) [zigpy.application] Device 0xcbef (00:15:8d:00:01:ed:46:b0) joined the network
2021-10-14 12:17:49 DEBUG (MainThread) [zigpy_znp.zigbee.application] Pretending we received a ZDO message: b'\xFF\xEF\xCB\xB0\x46\xED\x01\x00\x8D\x15\x00\x8E'
2021-10-14 12:17:49 DEBUG (MainThread) [zigpy.zdo] [0xcbef:zdo] ZDO request ZDOCmd.Device_annce: [0xCBEF, 00:15:8d:00:01:ed:46:b0, 142]
2021-10-14 12:17:49 DEBUG (MainThread) [zigpy_znp.api] Received command: ZDO.ExtRouteChk.Rsp(Status=<RoutingStatus.SUCCESS: 0>)
2021-10-14 12:17:49 DEBUG (MainThread) [homeassistant.components.zha.core.device] [0xCBEF](Zigate-Router): started initialization
2021-10-14 12:17:49 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0xCBEF:ZDO](Zigate-Router): 'async_initialize' stage succeeded
2021-10-14 12:17:49 DEBUG (MainThread) [zigpy_znp.zigbee.application] Intercepted a ZDO request: dst_addr=AddrModeAddress(mode=<AddrMode.NWK: 2>, address=0xCBEF), dst_ep=0, src_ep=0, cluster=ZDOCmd.Bind_req, sequence=125, options=TransmitOptions.SUPPRESS_ROUTE_DISC_NETWORK|ACK_REQUEST, radius=30, data=b'}\xb0F\xed\x01\x00\x8d\x15\x00\x01\x06\x00\x03Z\xa7{#\x00K\x12\x00\x01'
2021-10-14 12:17:49 DEBUG (MainThread) [zigpy_znp.zigbee.application] Intercepted AP ZDO request ZDOCmd.Bind_req({'SrcAddress': 00:15:8d:00:01:ed:46:b0, 'SrcEndpoint': 1, 'ClusterID': 6, 'DstAddress': MultiAddress(addrmode=3, ieee=00:12:4b:00:23:7b:a7:5a, endpoint=1)}) and replaced with ZDO.BindReq.Req(Dst=0xCBEF, Src=00:15:8d:00:01:ed:46:b0, SrcEndpoint=1, ClusterId=6, Address=MultiAddress(addrmode=3, ieee=00:12:4b:00:23:7b:a7:5a, endpoint=1))
2021-10-14 12:17:49 DEBUG (MainThread) [zigpy_znp.api] Sending request: ZDO.BindReq.Req(Dst=0xCBEF, Src=00:15:8d:00:01:ed:46:b0, SrcEndpoint=1, ClusterId=6, Address=MultiAddress(addrmode=3, ieee=00:12:4b:00:23:7b:a7:5a, endpoint=1))
2021-10-14 12:17:49 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0xCBEF:1:0x0000]: initializing channel: from_cache: False
2021-10-14 12:17:49 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0xCBEF:1:0x0000]: finished channel configuration
2021-10-14 12:17:49 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0xCBEF:1:0x0006]: initializing channel: from_cache: False
2021-10-14 12:17:49 DEBUG (MainThread) [zigpy_znp.api] Received command: ZDO.BindReq.Rsp(Status=<Status.SUCCESS: 0>)
2021-10-14 12:17:49 DEBUG (MainThread) [zigpy_znp.api] Sending request: AF.DataRequestExt.Req(DstAddrModeAddress=AddrModeAddress(mode=<AddrMode.NWK: 2>, address=0xCBEF), DstEndpoint=1, DstPanId=0x0000, SrcEndpoint=1, ClusterId=4, TSN=126, Options=<TransmitOptions.SUPPRESS_ROUTE_DISC_NETWORK|ACK_REQUEST: 48>, Radius=30, Data=b'\x01\x7E\x02\x00')
2021-10-14 12:17:49 DEBUG (MainThread) [zigpy_znp.api] Received command: ZDO.BindRsp.Callback(Src=0xCBEF, Status=<Status.SUCCESS: 0>)
2021-10-14 12:17:49 DEBUG (MainThread) [zigpy_znp.zigbee.application] Pretending we received a ZDO message: b'\x7D\x00'
2021-10-14 12:17:49 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0xCBEF:1:0x0006]: bound 'on_off' cluster: Status.SUCCESS
2021-10-14 12:17:49 DEBUG (MainThread) [zigpy_znp.api] Received command: AF.DataRequestExt.Rsp(Status=<Status.SUCCESS: 0>)
2021-10-14 12:17:49 DEBUG (MainThread) [zigpy_znp.api] Received command: AF.DataConfirm.Callback(Status=<Status.SUCCESS: 0>, Endpoint=1, TSN=126)
2021-10-14 12:17:49 DEBUG (MainThread) [zigpy_znp.api] Sending request: AF.DataRequestExt.Req(DstAddrModeAddress=AddrModeAddress(mode=<AddrMode.NWK: 2>, address=0xCBEF), DstEndpoint=1, DstPanId=0x0000, SrcEndpoint=1, ClusterId=6, TSN=127, Options=<TransmitOptions.SUPPRESS_ROUTE_DISC_NETWORK|ACK_REQUEST: 48>, Radius=30, Data=b'\x00\x7F\x00\x00\x00')
2021-10-14 12:17:49 DEBUG (MainThread) [zigpy_znp.api] Received command: AF.DataRequestExt.Rsp(Status=<Status.SUCCESS: 0>)
2021-10-14 12:17:49 DEBUG (MainThread) [zigpy_znp.api] Sending request: AF.DataRequestExt.Req(DstAddrModeAddress=AddrModeAddress(mode=<AddrMode.NWK: 2>, address=0xCBEF), DstEndpoint=1, DstPanId=0x0000, SrcEndpoint=1, ClusterId=6, TSN=128, Options=<TransmitOptions.SUPPRESS_ROUTE_DISC_NETWORK|ACK_REQUEST: 48>, Radius=30, Data=b'\x00\x80\x06\x00\x00\x00\x10\x00\x00\x84\x03')
2021-10-14 12:17:49 DEBUG (MainThread) [zigpy_znp.api] Received command: AF.DataConfirm.Callback(Status=<Status.SUCCESS: 0>, Endpoint=1, TSN=127)
2021-10-14 12:17:49 DEBUG (MainThread) [zigpy_znp.api] Received command: AF.IncomingMsg.Callback(GroupId=0x0000, ClusterId=6, SrcAddr=0xCBEF, SrcEndpoint=1, DstEndpoint=1, WasBroadcast=<Bool.false: 0>, LQI=3, SecurityUse=<Bool.false: 0>, TimeStamp=8211319, TSN=0, Data=b'\x18\x7F\x01\x00\x00\x00\x10\x00', MacSrcAddr=0xCBEF, MsgResultRadius=29)
2021-10-14 12:17:49 DEBUG (MainThread) [zigpy_znp.api] Received command: AF.DataRequestExt.Rsp(Status=<Status.SUCCESS: 0>)
2021-10-14 12:17:49 DEBUG (MainThread) [zigpy.zcl] [0xcbef:1:0x0006] ZCL deserialize: <ZCLHeader frame_control=<FrameControl frame_type=GLOBAL_COMMAND manufacturer_specific=False is_reply=True disable_default_response=True> manufacturer=None tsn=127 command_id=Command.Read_Attributes_rsp>
2021-10-14 12:17:49 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0xCBEF:1:0x0006]: finished channel configuration
2021-10-14 12:17:49 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0xCBEF:1:0x0000]: 'async_initialize' stage succeeded
2021-10-14 12:17:49 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0xCBEF:1:0x0006]: 'async_initialize' stage succeeded
2021-10-14 12:17:49 DEBUG (MainThread) [homeassistant.components.zha.core.device] [0xCBEF](Zigate-Router): power source: Mains
2021-10-14 12:17:49 DEBUG (MainThread) [homeassistant.components.zha.core.device] [0xCBEF](Zigate-Router): completed initialization
2021-10-14 12:17:49 DEBUG (MainThread) [zigpy.appdb] Device 00:15:8d:00:01:ed:46:b0 already exists. Updating it.
2021-10-14 12:17:50 DEBUG (MainThread) [zigpy_znp.api] Received command: AF.DataConfirm.Callback(Status=<Status.SUCCESS: 0>, Endpoint=1, TSN=128)
2021-10-14 12:17:50 DEBUG (MainThread) [zigpy_znp.api] Received command: AF.IncomingMsg.Callback(GroupId=0x0000, ClusterId=6, SrcAddr=0xCBEF, SrcEndpoint=1, DstEndpoint=1, WasBroadcast=<Bool.false: 0>, LQI=3, SecurityUse=<Bool.false: 0>, TimeStamp=8235349, TSN=0, Data=b'\x18\x80\x07\x8D\x00\x00\x00', MacSrcAddr=0xCBEF, MsgResultRadius=29)
2021-10-14 12:17:50 DEBUG (MainThread) [zigpy.zcl] [0xcbef:1:0x0006] ZCL deserialize: <ZCLHeader frame_control=<FrameControl frame_type=GLOBAL_COMMAND manufacturer_specific=False is_reply=True disable_default_response=True> manufacturer=None tsn=128 command_id=Command.Configure_Reporting_rsp>
2021-10-14 12:17:50 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0xCBEF:1:0x0000]: 'async_configure' stage succeeded
2021-10-14 12:17:50 WARNING (MainThread) [homeassistant.components.zha.core.channels.base] [0xCBEF:1:0x0006]: 'async_configure' stage failed: 'ConfigureReportingResponse' object has no attribute 'status'
2021-10-14 12:17:50 DEBUG (MainThread) [homeassistant.components.zha.core.device] [0xCBEF](Zigate-Router): completed configuration
2021-10-14 12:17:50 DEBUG (MainThread) [homeassistant.components.zha.core.device] [0xCBEF](Zigate-Router): stored in registry: ZhaDeviceEntry(name='ZiGate ZiGate USB-TTL 3.1e', ieee='00:15:8d:00:01:ed:46:b0', last_seen=1634210270.1241283)
2021-10-14 12:17:50 DEBUG (MainThread) [zigpy_znp.api] Sending request: AF.DataRequestExt.Req(DstAddrModeAddress=AddrModeAddress(mode=<AddrMode.NWK: 2>, address=0xCBEF), DstEndpoint=1, DstPanId=0x0000, SrcEndpoint=1, ClusterId=3, TSN=129, Options=<TransmitOptions.SUPPRESS_ROUTE_DISC_NETWORK|ACK_REQUEST: 48>, Radius=30, Data=b'\x01\x81\x40\x02\x00')
2021-10-14 12:17:50 DEBUG (MainThread) [zigpy_znp.api] Received command: AF.DataRequestExt.Rsp(Status=<Status.SUCCESS: 0>)
2021-10-14 12:17:53 DEBUG (MainThread) [zigpy_znp.api] Received command: AF.DataConfirm.Callback(Status=<Status.MAC_NO_ACK: 233>, Endpoint=1, TSN=129)
2021-10-14 12:17:53 DEBUG (MainThread) [zigpy_znp.zigbee.application] Request failed (Unsuccessful request status code: <Status.MAC_NO_ACK: 233>), retry attempt 1 of 5
2021-10-14 12:17:54 DEBUG (MainThread) [zigpy.endpoint] [0xcbef:1] Failed to sync-up group membership
2021-10-14 12:17:54 DEBUG (MainThread) [zigpy_znp.api] Sending request: AF.DataRequestExt.Req(DstAddrModeAddress=AddrModeAddress(mode=<AddrMode.NWK: 2>, address=0xCBEF), DstEndpoint=1, DstPanId=0x0000, SrcEndpoint=1, ClusterId=3, TSN=129, Options=<TransmitOptions.SUPPRESS_ROUTE_DISC_NETWORK|ACK_REQUEST: 48>, Radius=30, Data=b'\x01\x81\x40\x02\x00')
2021-10-14 12:17:54 DEBUG (MainThread) [zigpy_znp.api] Received command: AF.DataRequestExt.Rsp(Status=<Status.SUCCESS: 0>)
2021-10-14 12:17:55 DEBUG (MainThread) [zigpy_znp.api] Received command: AF.DataConfirm.Callback(Status=<Status.SUCCESS: 0>, Endpoint=1, TSN=129)
2021-10-14 12:17:55 DEBUG (MainThread) [zigpy_znp.api] Received command: AF.IncomingMsg.Callback(GroupId=0x0000, ClusterId=3, SrcAddr=0xCBEF, SrcEndpoint=1, DstEndpoint=1, WasBroadcast=<Bool.false: 0>, LQI=0, SecurityUse=<Bool.false: 0>, TimeStamp=8549324, TSN=0, Data=b'\x18\x81\x0B\x40\x81', MacSrcAddr=0xCBEF, MsgResultRadius=29)
2021-10-14 12:17:55 DEBUG (MainThread) [zigpy.zcl] [0xcbef:1:0x0003] ZCL deserialize: <ZCLHeader frame_control=<FrameControl frame_type=GLOBAL_COMMAND manufacturer_specific=False is_reply=True disable_default_response=True> manufacturer=None tsn=129 command_id=Command.Default_Response>
2021-10-14 12:17:55 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0xCBEF:1:0x0003]: executed 'trigger_effect' command with args: '(2, 0)' kwargs: '{}' result: [64, <Status.UNSUP_CLUSTER_COMMAND: 129>]
2021-10-14 12:17:55 DEBUG (MainThread) [homeassistant.components.zha.core.device] [0xCBEF](Zigate-Router): started initialization
2021-10-14 12:17:55 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0xCBEF:ZDO](Zigate-Router): 'async_initialize' stage succeeded
2021-10-14 12:17:55 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0xCBEF:1:0x0000]: initializing channel: from_cache: False
2021-10-14 12:17:55 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0xCBEF:1:0x0000]: finished channel configuration
2021-10-14 12:17:55 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0xCBEF:1:0x0006]: initializing channel: from_cache: False
2021-10-14 12:17:55 DEBUG (MainThread) [zigpy_znp.api] Sending request: AF.DataRequestExt.Req(DstAddrModeAddress=AddrModeAddress(mode=<AddrMode.NWK: 2>, address=0xCBEF), DstEndpoint=1, DstPanId=0x0000, SrcEndpoint=1, ClusterId=6, TSN=130, Options=<TransmitOptions.SUPPRESS_ROUTE_DISC_NETWORK|ACK_REQUEST: 48>, Radius=30, Data=b'\x00\x82\x00\x00\x00')
2021-10-14 12:17:55 DEBUG (MainThread) [zigpy_znp.api] Received command: AF.DataRequestExt.Rsp(Status=<Status.SUCCESS: 0>)
2021-10-14 12:17:55 DEBUG (MainThread) [zigpy_znp.api] Received command: AF.DataConfirm.Callback(Status=<Status.SUCCESS: 0>, Endpoint=1, TSN=130)
2021-10-14 12:17:55 DEBUG (MainThread) [zigpy_znp.api] Received command: AF.IncomingMsg.Callback(GroupId=0x0000, ClusterId=6, SrcAddr=0xCBEF, SrcEndpoint=1, DstEndpoint=1, WasBroadcast=<Bool.false: 0>, LQI=0, SecurityUse=<Bool.false: 0>, TimeStamp=8555633, TSN=0, Data=b'\x18\x82\x01\x00\x00\x00\x10\x00', MacSrcAddr=0xCBEF, MsgResultRadius=29)
2021-10-14 12:17:55 DEBUG (MainThread) [zigpy.zcl] [0xcbef:1:0x0006] ZCL deserialize: <ZCLHeader frame_control=<FrameControl frame_type=GLOBAL_COMMAND manufacturer_specific=False is_reply=True disable_default_response=True> manufacturer=None tsn=130 command_id=Command.Read_Attributes_rsp>
2021-10-14 12:17:55 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0xCBEF:1:0x0006]: finished channel configuration
2021-10-14 12:17:55 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0xCBEF:1:0x0000]: 'async_initialize' stage succeeded
2021-10-14 12:17:55 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0xCBEF:1:0x0006]: 'async_initialize' stage succeeded
2021-10-14 12:17:55 DEBUG (MainThread) [homeassistant.components.zha.core.device] [0xCBEF](Zigate-Router): power source: Mains
2021-10-14 12:17:55 DEBUG (MainThread) [homeassistant.components.zha.core.device] [0xCBEF](Zigate-Router): completed initialization

[pipiche38]

That is somehow the main issue with ZHA you need to have a quirk to get it working, which for a router/repeater doesn’t make sense Envoyé de mon iPhone

…

Le 14 oct. 2021 à 13:21, Rui Marinho ***@***.***> a écrit :  Unfortunately it seems like ZHA can't handle the router very well. Not even LQI is reported and some cluster commands are unavailable. 2021-10-14 12:17:38 INFO (MainThread) [zigpy_znp.zigbee.application] Permitting joins for 60 seconds 2021-10-14 12:17:38 DEBUG (MainThread) [zigpy_znp.zigbee.application] Intercepted a ZDO request: dst_addr=AddrModeAddress(mode=<AddrMode.Broadcast: 15>, address=0xFFFC), dst_ep=0, src_ep=0, cluster=54, sequence=124, options=TransmitOptions.NONE, radius=0, data=b'|<\x00' 2021-10-14 12:17:38 DEBUG (MainThread) [zigpy_znp.zigbee.application] Intercepted AP ZDO request 54({'PermitDuration': 60, 'TC_Significant': <Bool.false: 0>}) and replaced with ZDO.MgmtPermitJoinReq.Req(AddrMode=<AddrMode.Broadcast: 15>, Dst=0xFFFC, Duration=60, TCSignificance=0) 2021-10-14 12:17:38 DEBUG (MainThread) [zigpy_znp.api] Sending request: ZDO.MgmtPermitJoinReq.Req(AddrMode=<AddrMode.Broadcast: 15>, Dst=0xFFFC, Duration=60, TCSignificance=0) 2021-10-14 12:17:38 DEBUG (MainThread) [zigpy_znp.api] Received command: ZDO.MgmtPermitJoinReq.Rsp(Status=<Status.SUCCESS: 0>) 2021-10-14 12:17:38 DEBUG (MainThread) [zigpy_znp.api] Received command: ZDO.MgmtPermitJoinRsp.Callback(Src=0x0000, Status=<Status.SUCCESS: 0>) 2021-10-14 12:17:49 DEBUG (MainThread) [zigpy_znp.api] Received command: ZDO.TCDevInd.Callback(SrcNwk=0xCBEF, SrcIEEE=00:15:8d:00:01:ed:46:b0, ParentNwk=0x0000) 2021-10-14 12:17:49 INFO (MainThread) [zigpy_znp.zigbee.application] TC device join: ZDO.TCDevInd.Callback(SrcNwk=0xCBEF, SrcIEEE=00:15:8d:00:01:ed:46:b0, ParentNwk=0x0000) 2021-10-14 12:17:49 INFO (MainThread) [zigpy.application] Device 0xcbef (00:15:8d:00:01:ed:46:b0) joined the network 2021-10-14 12:17:49 DEBUG (MainThread) [zigpy.application] Device 00:15:8d:00:01:ed:46:b0 changed id (0xcbef => 0xcbef) 2021-10-14 12:17:49 DEBUG (MainThread) [zigpy.device] [0xcbef] Skipping initialization, device is fully initialized 2021-10-14 12:17:49 DEBUG (MainThread) [zigpy.application] Device is initialized <Device model='Zigate-Router' manuf='NXP' nwk=0xCBEF ieee=00:15:8d:00:01:ed:46:b0 is_initialized=True> 2021-10-14 12:17:49 DEBUG (MainThread) [zigpy.quirks.registry] Checking quirks for NXP Zigate-Router (00:15:8d:00:01:ed:46:b0) 2021-10-14 12:17:49 DEBUG (MainThread) [zigpy.quirks.registry] Considering <class 'zhaquirks.xbee.xbee_io.XBeeSensor'> 2021-10-14 12:17:49 DEBUG (MainThread) [zigpy.quirks.registry] Fail because endpoint list mismatch: {232, 230} {1} 2021-10-14 12:17:49 DEBUG (MainThread) [zigpy.quirks.registry] Considering <class 'zhaquirks.xbee.xbee3_io.XBee3Sensor'> 2021-10-14 12:17:49 DEBUG (MainThread) [zigpy.quirks.registry] Fail because endpoint list mismatch: {232, 230} {1} 2021-10-14 12:17:49 DEBUG (MainThread) [zigpy.quirks.registry] Considering <class 'zhaquirks.smartthings.tag_v4.SmartThingsTagV4'> 2021-10-14 12:17:49 DEBUG (MainThread) [zigpy.quirks.registry] Fail because device_type mismatch on at least one endpoint 2021-10-14 12:17:49 DEBUG (MainThread) [zigpy.quirks.registry] Considering <class 'zhaquirks.smartthings.multi.SmartthingsMultiPurposeSensor'> 2021-10-14 12:17:49 DEBUG (MainThread) [zigpy.quirks.registry] Fail because device_type mismatch on at least one endpoint 2021-10-14 12:17:49 DEBUG (MainThread) [zigpy.quirks.registry] Considering <class 'zhaquirks.netvox.z308e3ed.Z308E3ED'> 2021-10-14 12:17:49 DEBUG (MainThread) [zigpy.quirks.registry] Fail because device_type mismatch on at least one endpoint 2021-10-14 12:17:49 DEBUG (MainThread) [zigpy.quirks.registry] Considering <class 'zhaquirks.gledopto.soposhgu10.SoposhGU10'> 2021-10-14 12:17:49 DEBUG (MainThread) [zigpy.quirks.registry] Fail because endpoint list mismatch: {11, 13} {1} 2021-10-14 12:17:49 DEBUG (MainThread) [zigpy.quirks.registry] Considering <class 'bellows.zigbee.application.EZSPCoordinator'> 2021-10-14 12:17:49 DEBUG (MainThread) [zigpy.quirks.registry] Fail because device_type mismatch on at least one endpoint 2021-10-14 12:17:49 DEBUG (MainThread) [zigpy_znp.api] Sending request: ZDO.ExtRouteDisc.Req(Dst=0xCBEF, Options=<RouteDiscoveryOptions.UNICAST: 0>, Radius=30) 2021-10-14 12:17:49 DEBUG (MainThread) [homeassistant.components.zha.core.gateway] device - 0xCBEF:00:15:8d:00:01:ed:46:b0 entering async_device_initialized - is_new_join: False 2021-10-14 12:17:49 DEBUG (MainThread) [homeassistant.components.zha.core.gateway] device - 0xCBEF:00:15:8d:00:01:ed:46:b0 has been reset and re-added or its nwk address changed 2021-10-14 12:17:49 DEBUG (MainThread) [homeassistant.components.zha.core.gateway] skipping discovery for previously discovered device - 0xCBEF:00:15:8d:00:01:ed:46:b0 2021-10-14 12:17:49 DEBUG (MainThread) [homeassistant.components.zha.core.device] [0xCBEF](Zigate-Router): started configuration 2021-10-14 12:17:49 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0xCBEF:ZDO](Zigate-Router): 'async_configure' stage succeeded 2021-10-14 12:17:49 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0xCBEF:1:0x0000]: finished channel configuration 2021-10-14 12:17:49 DEBUG (MainThread) [zigpy_znp.api] Received command: ZDO.ExtRouteDisc.Rsp(Status=<Status.SUCCESS: 0>) 2021-10-14 12:17:49 DEBUG (MainThread) [zigpy_znp.api] Sending request: ZDO.ExtRouteChk.Req(Dst=0xCBEF, RtStatus=<RouteStatus.ACTIVE: 1>, Options=<RouteOptions.NO_ROUTE_CACHE|MTO_ROUTE: 3>) 2021-10-14 12:17:49 DEBUG (MainThread) [zigpy_znp.api] Received command: ZDO.EndDeviceAnnceInd.Callback(Src=0xCBEF, NWK=0xCBEF, IEEE=00:15:8d:00:01:ed:46:b0, Capabilities=<MACCapabilities.AllocateShortAddrDuringAssocNeeded|RXWhenIdle|MainsPowered|Router: 142>) 2021-10-14 12:17:49 INFO (MainThread) [zigpy_znp.zigbee.application] ZDO device announce: ZDO.EndDeviceAnnceInd.Callback(Src=0xCBEF, NWK=0xCBEF, IEEE=00:15:8d:00:01:ed:46:b0, Capabilities=<MACCapabilities.AllocateShortAddrDuringAssocNeeded|RXWhenIdle|MainsPowered|Router: 142>) 2021-10-14 12:17:49 INFO (MainThread) [zigpy.application] Device 0xcbef (00:15:8d:00:01:ed:46:b0) joined the network 2021-10-14 12:17:49 DEBUG (MainThread) [zigpy_znp.zigbee.application] Pretending we received a ZDO message: b'\xFF\xEF\xCB\xB0\x46\xED\x01\x00\x8D\x15\x00\x8E' 2021-10-14 12:17:49 DEBUG (MainThread) [zigpy.zdo] [0xcbef:zdo] ZDO request ZDOCmd.Device_annce: [0xCBEF, 00:15:8d:00:01:ed:46:b0, 142] 2021-10-14 12:17:49 DEBUG (MainThread) [zigpy_znp.api] Received command: ZDO.ExtRouteChk.Rsp(Status=<RoutingStatus.SUCCESS: 0>) 2021-10-14 12:17:49 DEBUG (MainThread) [homeassistant.components.zha.core.device] [0xCBEF](Zigate-Router): started initialization 2021-10-14 12:17:49 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0xCBEF:ZDO](Zigate-Router): 'async_initialize' stage succeeded 2021-10-14 12:17:49 DEBUG (MainThread) [zigpy_znp.zigbee.application] Intercepted a ZDO request: dst_addr=AddrModeAddress(mode=<AddrMode.NWK: 2>, address=0xCBEF), dst_ep=0, src_ep=0, cluster=ZDOCmd.Bind_req, sequence=125, options=TransmitOptions.SUPPRESS_ROUTE_DISC_NETWORK|ACK_REQUEST, radius=30, data=b'}\xb0F\xed\x01\x00\x8d\x15\x00\x01\x06\x00\x03Z\xa7{#\x00K\x12\x00\x01' 2021-10-14 12:17:49 DEBUG (MainThread) [zigpy_znp.zigbee.application] Intercepted AP ZDO request ZDOCmd.Bind_req({'SrcAddress': 00:15:8d:00:01:ed:46:b0, 'SrcEndpoint': 1, 'ClusterID': 6, 'DstAddress': MultiAddress(addrmode=3, ieee=00:12:4b:00:23:7b:a7:5a, endpoint=1)}) and replaced with ZDO.BindReq.Req(Dst=0xCBEF, Src=00:15:8d:00:01:ed:46:b0, SrcEndpoint=1, ClusterId=6, Address=MultiAddress(addrmode=3, ieee=00:12:4b:00:23:7b:a7:5a, endpoint=1)) 2021-10-14 12:17:49 DEBUG (MainThread) [zigpy_znp.api] Sending request: ZDO.BindReq.Req(Dst=0xCBEF, Src=00:15:8d:00:01:ed:46:b0, SrcEndpoint=1, ClusterId=6, Address=MultiAddress(addrmode=3, ieee=00:12:4b:00:23:7b:a7:5a, endpoint=1)) 2021-10-14 12:17:49 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0xCBEF:1:0x0000]: initializing channel: from_cache: False 2021-10-14 12:17:49 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0xCBEF:1:0x0000]: finished channel configuration 2021-10-14 12:17:49 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0xCBEF:1:0x0006]: initializing channel: from_cache: False 2021-10-14 12:17:49 DEBUG (MainThread) [zigpy_znp.api] Received command: ZDO.BindReq.Rsp(Status=<Status.SUCCESS: 0>) 2021-10-14 12:17:49 DEBUG (MainThread) [zigpy_znp.api] Sending request: AF.DataRequestExt.Req(DstAddrModeAddress=AddrModeAddress(mode=<AddrMode.NWK: 2>, address=0xCBEF), DstEndpoint=1, DstPanId=0x0000, SrcEndpoint=1, ClusterId=4, TSN=126, Options=<TransmitOptions.SUPPRESS_ROUTE_DISC_NETWORK|ACK_REQUEST: 48>, Radius=30, Data=b'\x01\x7E\x02\x00') 2021-10-14 12:17:49 DEBUG (MainThread) [zigpy_znp.api] Received command: ZDO.BindRsp.Callback(Src=0xCBEF, Status=<Status.SUCCESS: 0>) 2021-10-14 12:17:49 DEBUG (MainThread) [zigpy_znp.zigbee.application] Pretending we received a ZDO message: b'\x7D\x00' 2021-10-14 12:17:49 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0xCBEF:1:0x0006]: bound 'on_off' cluster: Status.SUCCESS 2021-10-14 12:17:49 DEBUG (MainThread) [zigpy_znp.api] Received command: AF.DataRequestExt.Rsp(Status=<Status.SUCCESS: 0>) 2021-10-14 12:17:49 DEBUG (MainThread) [zigpy_znp.api] Received command: AF.DataConfirm.Callback(Status=<Status.SUCCESS: 0>, Endpoint=1, TSN=126) 2021-10-14 12:17:49 DEBUG (MainThread) [zigpy_znp.api] Sending request: AF.DataRequestExt.Req(DstAddrModeAddress=AddrModeAddress(mode=<AddrMode.NWK: 2>, address=0xCBEF), DstEndpoint=1, DstPanId=0x0000, SrcEndpoint=1, ClusterId=6, TSN=127, Options=<TransmitOptions.SUPPRESS_ROUTE_DISC_NETWORK|ACK_REQUEST: 48>, Radius=30, Data=b'\x00\x7F\x00\x00\x00') 2021-10-14 12:17:49 DEBUG (MainThread) [zigpy_znp.api] Received command: AF.DataRequestExt.Rsp(Status=<Status.SUCCESS: 0>) 2021-10-14 12:17:49 DEBUG (MainThread) [zigpy_znp.api] Sending request: AF.DataRequestExt.Req(DstAddrModeAddress=AddrModeAddress(mode=<AddrMode.NWK: 2>, address=0xCBEF), DstEndpoint=1, DstPanId=0x0000, SrcEndpoint=1, ClusterId=6, TSN=128, Options=<TransmitOptions.SUPPRESS_ROUTE_DISC_NETWORK|ACK_REQUEST: 48>, Radius=30, Data=b'\x00\x80\x06\x00\x00\x00\x10\x00\x00\x84\x03') 2021-10-14 12:17:49 DEBUG (MainThread) [zigpy_znp.api] Received command: AF.DataConfirm.Callback(Status=<Status.SUCCESS: 0>, Endpoint=1, TSN=127) 2021-10-14 12:17:49 DEBUG (MainThread) [zigpy_znp.api] Received command: AF.IncomingMsg.Callback(GroupId=0x0000, ClusterId=6, SrcAddr=0xCBEF, SrcEndpoint=1, DstEndpoint=1, WasBroadcast=<Bool.false: 0>, LQI=3, SecurityUse=<Bool.false: 0>, TimeStamp=8211319, TSN=0, Data=b'\x18\x7F\x01\x00\x00\x00\x10\x00', MacSrcAddr=0xCBEF, MsgResultRadius=29) 2021-10-14 12:17:49 DEBUG (MainThread) [zigpy_znp.api] Received command: AF.DataRequestExt.Rsp(Status=<Status.SUCCESS: 0>) 2021-10-14 12:17:49 DEBUG (MainThread) [zigpy.zcl] [0xcbef:1:0x0006] ZCL deserialize: <ZCLHeader frame_control=<FrameControl frame_type=GLOBAL_COMMAND manufacturer_specific=False is_reply=True disable_default_response=True> manufacturer=None tsn=127 command_id=Command.Read_Attributes_rsp> 2021-10-14 12:17:49 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0xCBEF:1:0x0006]: finished channel configuration 2021-10-14 12:17:49 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0xCBEF:1:0x0000]: 'async_initialize' stage succeeded 2021-10-14 12:17:49 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0xCBEF:1:0x0006]: 'async_initialize' stage succeeded 2021-10-14 12:17:49 DEBUG (MainThread) [homeassistant.components.zha.core.device] [0xCBEF](Zigate-Router): power source: Mains 2021-10-14 12:17:49 DEBUG (MainThread) [homeassistant.components.zha.core.device] [0xCBEF](Zigate-Router): completed initialization 2021-10-14 12:17:49 DEBUG (MainThread) [zigpy.appdb] Device 00:15:8d:00:01:ed:46:b0 already exists. Updating it. 2021-10-14 12:17:50 DEBUG (MainThread) [zigpy_znp.api] Received command: AF.DataConfirm.Callback(Status=<Status.SUCCESS: 0>, Endpoint=1, TSN=128) 2021-10-14 12:17:50 DEBUG (MainThread) [zigpy_znp.api] Received command: AF.IncomingMsg.Callback(GroupId=0x0000, ClusterId=6, SrcAddr=0xCBEF, SrcEndpoint=1, DstEndpoint=1, WasBroadcast=<Bool.false: 0>, LQI=3, SecurityUse=<Bool.false: 0>, TimeStamp=8235349, TSN=0, Data=b'\x18\x80\x07\x8D\x00\x00\x00', MacSrcAddr=0xCBEF, MsgResultRadius=29) 2021-10-14 12:17:50 DEBUG (MainThread) [zigpy.zcl] [0xcbef:1:0x0006] ZCL deserialize: <ZCLHeader frame_control=<FrameControl frame_type=GLOBAL_COMMAND manufacturer_specific=False is_reply=True disable_default_response=True> manufacturer=None tsn=128 command_id=Command.Configure_Reporting_rsp> 2021-10-14 12:17:50 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0xCBEF:1:0x0000]: 'async_configure' stage succeeded 2021-10-14 12:17:50 WARNING (MainThread) [homeassistant.components.zha.core.channels.base] [0xCBEF:1:0x0006]: 'async_configure' stage failed: 'ConfigureReportingResponse' object has no attribute 'status' 2021-10-14 12:17:50 DEBUG (MainThread) [homeassistant.components.zha.core.device] [0xCBEF](Zigate-Router): completed configuration 2021-10-14 12:17:50 DEBUG (MainThread) [homeassistant.components.zha.core.device] [0xCBEF](Zigate-Router): stored in registry: ZhaDeviceEntry(name='ZiGate ZiGate USB-TTL 3.1e', ieee='00:15:8d:00:01:ed:46:b0', last_seen=1634210270.1241283) 2021-10-14 12:17:50 DEBUG (MainThread) [zigpy_znp.api] Sending request: AF.DataRequestExt.Req(DstAddrModeAddress=AddrModeAddress(mode=<AddrMode.NWK: 2>, address=0xCBEF), DstEndpoint=1, DstPanId=0x0000, SrcEndpoint=1, ClusterId=3, TSN=129, Options=<TransmitOptions.SUPPRESS_ROUTE_DISC_NETWORK|ACK_REQUEST: 48>, Radius=30, Data=b'\x01\x81\x40\x02\x00') 2021-10-14 12:17:50 DEBUG (MainThread) [zigpy_znp.api] Received command: AF.DataRequestExt.Rsp(Status=<Status.SUCCESS: 0>) 2021-10-14 12:17:53 DEBUG (MainThread) [zigpy_znp.api] Received command: AF.DataConfirm.Callback(Status=<Status.MAC_NO_ACK: 233>, Endpoint=1, TSN=129) 2021-10-14 12:17:53 DEBUG (MainThread) [zigpy_znp.zigbee.application] Request failed (Unsuccessful request status code: <Status.MAC_NO_ACK: 233>), retry attempt 1 of 5 2021-10-14 12:17:54 DEBUG (MainThread) [zigpy.endpoint] [0xcbef:1] Failed to sync-up group membership 2021-10-14 12:17:54 DEBUG (MainThread) [zigpy_znp.api] Sending request: AF.DataRequestExt.Req(DstAddrModeAddress=AddrModeAddress(mode=<AddrMode.NWK: 2>, address=0xCBEF), DstEndpoint=1, DstPanId=0x0000, SrcEndpoint=1, ClusterId=3, TSN=129, Options=<TransmitOptions.SUPPRESS_ROUTE_DISC_NETWORK|ACK_REQUEST: 48>, Radius=30, Data=b'\x01\x81\x40\x02\x00') 2021-10-14 12:17:54 DEBUG (MainThread) [zigpy_znp.api] Received command: AF.DataRequestExt.Rsp(Status=<Status.SUCCESS: 0>) 2021-10-14 12:17:55 DEBUG (MainThread) [zigpy_znp.api] Received command: AF.DataConfirm.Callback(Status=<Status.SUCCESS: 0>, Endpoint=1, TSN=129) 2021-10-14 12:17:55 DEBUG (MainThread) [zigpy_znp.api] Received command: AF.IncomingMsg.Callback(GroupId=0x0000, ClusterId=3, SrcAddr=0xCBEF, SrcEndpoint=1, DstEndpoint=1, WasBroadcast=<Bool.false: 0>, LQI=0, SecurityUse=<Bool.false: 0>, TimeStamp=8549324, TSN=0, Data=b'\x18\x81\x0B\x40\x81', MacSrcAddr=0xCBEF, MsgResultRadius=29) 2021-10-14 12:17:55 DEBUG (MainThread) [zigpy.zcl] [0xcbef:1:0x0003] ZCL deserialize: <ZCLHeader frame_control=<FrameControl frame_type=GLOBAL_COMMAND manufacturer_specific=False is_reply=True disable_default_response=True> manufacturer=None tsn=129 command_id=Command.Default_Response> 2021-10-14 12:17:55 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0xCBEF:1:0x0003]: executed 'trigger_effect' command with args: '(2, 0)' kwargs: '{}' result: [64, <Status.UNSUP_CLUSTER_COMMAND: 129>] 2021-10-14 12:17:55 DEBUG (MainThread) [homeassistant.components.zha.core.device] [0xCBEF](Zigate-Router): started initialization 2021-10-14 12:17:55 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0xCBEF:ZDO](Zigate-Router): 'async_initialize' stage succeeded 2021-10-14 12:17:55 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0xCBEF:1:0x0000]: initializing channel: from_cache: False 2021-10-14 12:17:55 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0xCBEF:1:0x0000]: finished channel configuration 2021-10-14 12:17:55 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0xCBEF:1:0x0006]: initializing channel: from_cache: False 2021-10-14 12:17:55 DEBUG (MainThread) [zigpy_znp.api] Sending request: AF.DataRequestExt.Req(DstAddrModeAddress=AddrModeAddress(mode=<AddrMode.NWK: 2>, address=0xCBEF), DstEndpoint=1, DstPanId=0x0000, SrcEndpoint=1, ClusterId=6, TSN=130, Options=<TransmitOptions.SUPPRESS_ROUTE_DISC_NETWORK|ACK_REQUEST: 48>, Radius=30, Data=b'\x00\x82\x00\x00\x00') 2021-10-14 12:17:55 DEBUG (MainThread) [zigpy_znp.api] Received command: AF.DataRequestExt.Rsp(Status=<Status.SUCCESS: 0>) 2021-10-14 12:17:55 DEBUG (MainThread) [zigpy_znp.api] Received command: AF.DataConfirm.Callback(Status=<Status.SUCCESS: 0>, Endpoint=1, TSN=130) 2021-10-14 12:17:55 DEBUG (MainThread) [zigpy_znp.api] Received command: AF.IncomingMsg.Callback(GroupId=0x0000, ClusterId=6, SrcAddr=0xCBEF, SrcEndpoint=1, DstEndpoint=1, WasBroadcast=<Bool.false: 0>, LQI=0, SecurityUse=<Bool.false: 0>, TimeStamp=8555633, TSN=0, Data=b'\x18\x82\x01\x00\x00\x00\x10\x00', MacSrcAddr=0xCBEF, MsgResultRadius=29) 2021-10-14 12:17:55 DEBUG (MainThread) [zigpy.zcl] [0xcbef:1:0x0006] ZCL deserialize: <ZCLHeader frame_control=<FrameControl frame_type=GLOBAL_COMMAND manufacturer_specific=False is_reply=True disable_default_response=True> manufacturer=None tsn=130 command_id=Command.Read_Attributes_rsp> 2021-10-14 12:17:55 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0xCBEF:1:0x0006]: finished channel configuration 2021-10-14 12:17:55 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0xCBEF:1:0x0000]: 'async_initialize' stage succeeded 2021-10-14 12:17:55 DEBUG (MainThread) [homeassistant.components.zha.core.channels.base] [0xCBEF:1:0x0006]: 'async_initialize' stage succeeded 2021-10-14 12:17:55 DEBUG (MainThread) [homeassistant.components.zha.core.device] [0xCBEF](Zigate-Router): power source: Mains 2021-10-14 12:17:55 DEBUG (MainThread) [homeassistant.components.zha.core.device] [0xCBEF](Zigate-Router): completed initialization — You are receiving this because you commented. Reply to this email directly, view it on GitHub, or unsubscribe.