The adapter communicates with Shelly devices by REST API and the CoAP or MQTT protocol.
It uses the default Shelly firmware (no flashing of firmware needed!). You will find more and detailed information about the device here: Shelly
Note that devices connected using Shellies Range Extender functionality are not supported.
Please connect your devices directly to your (W)LAN and use a classic WLAN Repeater if required.
| Shelly Device | CoAP | MQTT |
|---|---|---|
| Shelly 1 (SHSW-1) | >= v3.3.0 | >= v3.3.0 |
| Shelly 1 PM (SHSW-PM) | >= v3.3.0 | >= v3.3.0 |
| Shelly 1L (SHSW-L) | >= v4.0.5 | >= v4.0.5 |
| Shelly 2 (SHSW-21/SHSW-22) | >= v3.3.0 | >= v3.3.0 |
| Shelly 2.5 (SHSW-25) | >= v3.3.0 | >= v3.3.0 |
| Shelly 4 Pro (SHSW-44) | >= v3.3.5 | >= v3.3.5 |
| Shelly Dimmer (SHDM-1) | >= v3.3.0 | >= v3.3.0 |
| Shelly Dimmer 2 (SHDM-2) | >= v3.3.4 | >= v3.3.4 |
| Shelly RGBW (SHRGBWW-01) | < v3.4.0 | < v3.4.0 |
| Shelly RGBW 2 (SHRGBW2) | >= v3.3.0 | >= v3.3.0 |
| Shelly i3 (SHIX3-1) | >= v3.3.0 | >= v3.3.0 |
| Shelly EM (SHEM) | >= v3.3.0 | >= v3.3.0 |
| Shelly 3EM (SHEM-3) | >= v3.3.0 | >= v3.3.0 |
| Shelly H&T (SHHT-1) | >= v3.3.0 | >= v3.3.0 |
| Shelly Smoke (SHSM-01) | >= v3.3.0 | >= v3.3.0 |
| Shelly Flood (SHWT-1) | >= v3.3.0 | >= v3.3.0 |
| Shelly Gas (SHGS-1) | >= v3.3.3 | >= v3.3.3 |
| Shelly Door/Window Sensor (SHDW-1) | >= v3.3.0 | >= v3.3.0 |
| Shelly Door/Window Sensor 2 (SHDW-2) | >= v3.3.5 | >= v3.3.5 |
| Shelly2LED (SH2LED) | >= v3.3.0 | >= v3.3.0 |
| Shelly Plug (SHPLG-1) | >= v3.3.0 | >= v3.3.0 |
| Shelly Plug S (SHPLG-S) | >= v3.3.0 | >= v3.3.0 |
| Shelly Plug 2 (SHPLG-2) | >= v3.3.0 | >= v3.3.0 |
| Shelly Sense (SHSEN-1) | >= v3.3.0 | >= v3.3.0 |
| Shelly Bulb (SHBLB) | >= v3.3.0 | >= v3.3.0 |
| Shelly Bulb Duo (SHBDUO-1) | >= v3.3.0 | >= v3.3.0 |
| Shelly Color Bulb (SHCB-1) | >= v4.0.5 | >= v4.0.5 |
| Shelly Vintage (SHVIN-1) | >= v3.3.0 | >= v3.3.0 |
| Shelly Uni (SHUNI-1) | >= v4.0.4 | >= v4.0.4 |
| Shelly Button (SHBTN-1) | >= v3.3.3 | >= v3.3.3 |
| Shelly Button (SHBTN-2) | >= v4.0.5 | >= v4.0.5 |
| Shelly Motion (SHMOS-01) | >= v4.0.6 | >= v4.0.6 |
| Shelly TRV (SHTRV-01) | >= v6.0.0 | >= v6.0.0 |
| Shelly Motion 2 (SHMOS-02) | => v6.2.0 | >= v6.2.0 |
| Shelly Device | CoAP | MQTT |
|---|---|---|
| Shelly Bluetooth Gateway (shellyblugw) | โ | >= v6.5.0 |
| Shelly Plus 0-10V (shellyplus010v) | โ | >= v6.9.0 |
| Shelly Plus 1 (shellyplus1) | โ | >= v5.0.0 |
| Shelly Plus 1 Mini (shellyplus1mini) | โ | >= v6.4.5 |
| Shelly Plus 1 PM Mini (shellyplus1pmmini) | โ | >= v6.4.5 |
| Shelly Plus 1 PM (shellyplus1pm) | โ | >= v5.0.0 |
| Shelly Plus 2 PM (shellyplus2pm) (2) | โ | >= v5.2.0 |
| Shelly Plus i4 (shellyplusi4) | โ | >= v5.3.0 |
| Shelly Plus i4 DC (shellyplusi4) | โ | >= v5.3.0 |
| Shelly Plus H&T (shellyplusht) | โ | >= v6.2.0 |
| Shelly Plus Plug S (shellyplusplugs) | โ | >= v6.4.0 |
| Shelly Plus PM Mini (shellypmmini) | โ | >= v6.4.5 |
| Shelly Plus RGBW PM (shellyplusrgbwpm) | โ | >= v8.2.0 |
| Shelly Plus Smoke (shellyplussmoke) | โ | >= v6.5.0 |
| Shelly Plus Uni (shellyplusuni) | โ | >= v9.5.1 |
| Shelly Pro 1 (shellypro1) | โ | >= v5.2.0 |
| Shelly Pro 1 PM (shellypro1pm) | โ | >= v5.2.0 |
| Shelly Pro 2 (shellypro2) | โ | >= v5.2.0 |
| Shelly Pro 2 PM (shellypro2pm) (2) | โ | >= v5.2.0 |
| Shelly Pro 3 (shellypro3) | โ | >= v6.2.0 |
| Shelly Pro 3 EM (shellypro3em) (3) | โ | >= v6.4.0 |
| Shelly Pro 3 EM (400A) (shellypro3em400) (3) | โ | >= v10.4.1 |
| Shelly Pro 3 EM 63 (shellypro3em63) (3) | โ | >= v9.1.0 |
| Shelly Pro 4 PM (shellypro4pm) | โ | >= v5.0.0 |
| Shelly Pro Dimmer 0/1-10V PM (shellypro0110pm) | โ | >= v9.5.0 |
| Shelly Pro Dimmer 1 PM (shellyprodm1pm) | โ | >= v8.0.0 |
| Shelly Pro Dimmer 2 PM (shellyprodm2pm) | โ | >= v7.0.0 |
| Shelly Pro Dual Cover PM (shellypro2cover) (2) | โ | >= v6.5.0 |
| Shelly Pro EM 2x50A | โ | >= v8.1.0 |
| Shelly Pro RGBWW PM (shellyprorgbwwpm) (1) | โ | >= v9.5.0 |
| Shelly Wall Display (shellywalldisplay) | โ | >= v7.0.0 |
| Shelly Wall Display XL (shellywalldisplay) (4) | โ | >= v7.0.0 |
Notes: (1) CCT component not yet available (2) slat control requires >= v10.4.0 (3) monophase support requires >= 10.5.2 (4) uses same clienetId as shellywalldisplay
| Shelly Device | CoAP | MQTT |
|---|---|---|
| Shelly 0/1-10V PM Gen3 (shelly0110dimg3) | โ | >= v8.4.0 |
| Shelly 1 Mini Gen3 (shelly1minig3) | โ | >= v7.0.0 |
| Shelly 1 PM Mini Gen3 (shelly1pmminig3) | โ | >= v7.0.0 |
| Shelly 1 PM Gen3 (shelly1pmg3) | โ | >= v8.0.0 |
| Shelly 1 Gen3 (shelly1g3) | โ | >= v8.0.0 |
| Shelly 1L Gen3 (shelly1lg3) | โ | >= v10.2.0 |
| Shelly 2L Gen3 (shelly2lg3) | โ | >= v10.2.0 |
| Shelly 2 PM Gen3 (shelly2pmg3) (1) | โ | >= v8.3.0 |
| Shelly 3EM-63 Gen3 (shelly3em63g3) | โ | >= v9.2.0 |
| Shelly AZ Plug (shellyazplug) | โ | >= v9.5.0 |
| Shelly BLU Gateway Gen3 (shellyblugwg3) | โ | >= v8.5.0 |
| Shelly DALI Dimmer Gen3 (shellyddimmerg3) | โ | >= v10.2.0 |
| Shelly Dimmer Gen3 (shellydimmerg3) | โ | >= v9.2.0 |
| Shelly EM Gen 3 (shellyemg3) | โ | >= v9.5.0 |
| Shelly H&T Gen3 (shellyhtg3) | โ | >= v8.0.0 |
| Shelly I4 / I4DC Gen3 (shellyi4g3) | โ | >= v8.5.0 |
| Shelly Pill (shellypill) | โ | >= v10.6.1 |
| Shelly Plug M Gen3 (shellyplugmg3) | โ | >= v10.6.0 |
| Shelly Plug PM Gen3 (shellyplugpmg3) | โ | >= v10.5.0 |
| Shelly Plug S Gen3 (shellyplugsg3) | โ | >= v8.5.0 |
| Shelly PM Mini Gen3 (shellypmminig3) | โ | >= v7.0.0 |
| Shelly Outdoor Plug S Gen3 (shellyoutdoorsg3) | โ | >= v9.3.0 |
| Shelly Shutter (shellyshutter) (1) | โ | >= v10.2.0 |
Notes: (1) slat control requires >= v10.4.0
| Shelly Device | CoAP | MQTT |
|---|---|---|
| Shelly 1 Gen4 (shelly1g4) | โ | >= v9.4.0 |
| Shelly 1 PM Gen4 (shelly1pmg4) | โ | >= v9.4.0 |
| Shelly 1 Mini Gen4 (shelly1minig4) | โ | >= v9.4.0 |
| Shelly 1 PM Mini Gen4 (shelly1pmminig4) | โ | >= v9.4.0 |
| Shelly 2 PM Gen4 (shelly2pmg4) (1) | โ | >= v10.2.0 |
| Shelly Dimmer Gen4 (shellydimmerg4) (*) | โ | >= v10.5.0 |
| Shelly EM mini Gen4 (shellypemminig4) | โ | >= v10.6.0 |
| Shelly Flood Gen4 (shellyfloodg4) | โ | >= v10.3.0 |
| Shelly Power Strip Gen4 (shellypstripg4) (*) | โ | >= v10.3.0 |
| Shelly Presence Gen4 (shellypresenceg4) | โ | >= v11.0.0 |
Notes: (1) slat control requires >= v10.4.0 (*) only partial support, full implementation work in progress
| Device | CoAP | MQTT |
|---|---|---|
| FrankEver Smart Watervalve (watervalve) | โ | >= v10.6.0 |
| LinkedGo Smart Thermost (st1820) | โ | >= v10.6.0 |
| Ogemray 25A (ogemray25a) | โ | >= v9.5.0 |
| Shelly Cury (cury) | โ | >= v11.0.0 |
Experimental - see documentation (en) / documentation (de) for details (Shelly Scripting required). Please note that currently no transmission of any data from the adapter to the BLU devices is possible.
| Shelly Device | Version |
|---|---|
| Shelly BLU Button and Button Tough 1 | >= v6.8.0 |
| Shelly BLU Door Window | >= v6.8.0 |
| Shelly BLU Motion | >= v6.8.0 |
| Shelly BLU H&T | >= v6.8.0 |
| Shelly BLU Wall Switch 4 | >= v8.2.0 |
| Shelly BLU RC Button 4 | >= v8.2.0 |
| Shelly BLU Distance | >= v10.4.1 |
| Shelly BLU WS 90 | >= v10.5.0 |
-
Shelly Plus Wall Dimmer US
-
Shelly Plus Plug US
-
USB-powered UVC LED strip
-
Shelly Wall Display X2
-
Shelly LoRa Add-On
-
Shelly Frankever Smart Sprinkler Controller (irrigation) (*)
-
Shelly BLU TRV
-
all BLU devices that need to receive data from the adapter.
(*) investigation still in progress (**) planned
This adapter uses Sentry libraries to automatically report exceptions and code errors to the developers. For more details and for information on how to disable the error reporting, see Sentry-Plugin Documentation! Sentry reporting is used starting with js-controller 3.0.
- (@mcm1957) Adapter requires node.js >= 22, js-controller >= 6.0.11 and admin >= 7.8.20 now.
- (@GermanBluefox) Device manager has been added providing info and control of devices and provisioning.
- (@mcm1957) IMPORTANT: Please read changelog at README.md listing more information.
- (@mcm1957) Added Shelly Presence Gen 4
- (@mcm1957) Added Shelly Cury
- (@GermanBluefox) Added support for Device manager: info and control of devices and provisioning
- (@GermanBluefox) Added detection of new devices in the background
- (@mcm1957) Some missing states added at illuminance component
- (@mcm1957) DISABLE all PLUG_UI functionality due to unrecoverable HW faults.
- (@mcm1957) Dependencies have been updated
- (HGlab01) OnUnload handling has been improved. [#1279]
- (@mcm1957) shellypill: missing input 202 has been added, nonexisting analog input has been removed.
- (@mcm1957) The-Pill-By-Shelly (shellypill) has been added. [#1232]
- (@mcm1957) Shelly EM mini Gen 4 (shellyemminimg4) and Plug M Gen 3 (shellyplugmg3) have been added. [#1327,#1332]
- (@mcm1957) Shelly BLU H&T Display ZB support for light attribute has been added. [#1230]
- (@mcm1957) Support for favorites for Gen 2+ devices with cover support has been added. [#1001]
- (@mcm1957) Power metering support has been added to RGB and RGBW components. [#1339]
- (@mcm1957) FrankEver Smart Watervalve (watervalve) has been added. [#1341]
- (@mcm1957) LinkedGo ST1820 (st1820) has been added. [#1257]
- (@mcm1957) Dependencies have been updated
- (@mcm1957) Monophase profile support has been fixed for shellypro3em and shellypro3em400.
The MIT License (MIT)
Copyright (c) 2026 iobroker-community-adapters iobroker-community-adapters@gmx.de
Copyright (c) 2018-2025 Thorsten Stueben thorsten@stueben.de,
Apollon77 iobroker@fischer-ka.de and
Matthias Kleine info@haus-automatisierung.com
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.